The MLE1013 Dual Biopotential/Temp Transmitter (Large Animal, TR70BB) amplifies two incoming ECG, EMG, EEG, or EOG Biopotential signals, as well as body temperature, from large animals (>1.5 kg) and converts them to digital signals for wireless transmission. This transmitter is used with the MLE1052
Wireless Dual Biopotential/Temperature Receiver (TR102). To make scheduled recordings the ML319
TR Scheduler Pod connected to a PowerLab and LabChart are required.
This transmitter can be used with the
Application:
- for use in animals >1.5 kg
- measure any two biopotentials; ECG, EEG, EMG and EOG
- measure body temperature
Features:
- Transmitter is fully implantable
- Includes a high gain amplifier, analog to digital converter (2 kHz sampling frequency)
- Transmitter power-down in situ, via the receiver, to conserve and extend battery life of the battery
- Transmission range is up to 5 meters
- Each transmitter channel is programmed with one of 12 independent transmitting frequencies
- Battery is easily recharged in approximately 12 hours (minimum) using the MLE1005WPC Wireless Power Charger Pad and Controller (TR801)
- A battery indicator on the front panel of the receiver indicates battery power level
Specifications:Input & DigitizationInput range: ±2 mV
Resolution: 12 bit A/D resolution
Frequency: 2 kHz
High pass: AC coupled, single pole, -3 dB point at 3.4 Hz
Electrode leads: coiled stainless steel (1 mm diameter)
Lead length: 15 cm standard
Battery Charge
Continuous data
Active mode: 7 days
Standby mode: 1 year
Recharge time: ~12 hours (conditions apply)
AntennaOmnidirectional
TransmissionFrequency band: 2.4 GHz ISM band
Data latency: 20 ms
Range: upto 5 meters
Data integrity: > 97%
PhysicalWeight: 75 g
Dimensions: 70 x 15 x 42 mm
Case material: medical grade silicone elastomer