Telemetry Biopotential Transmitter (Small Animal, TR40B)

The MLE1010 Telemetry Biopotential Transmitter (TR40B) is suitable for measuring ECG, EEG, EOG, EMG and temperature in small animals ≥200 g (ideally suited to rats).

MLE1010 transmitter features:

• Fully implantable
• A high gain amplifier, analog to digital converter (2 kHz sampling frequency and an input range of ±2 mV for the measured biopotential signal)
• Wireless transmission range up to 5 m
• Continuous charging/recording using the MLE1006CPS Wireless Continuous Power Supplier (Small Animal, TR802)
• Transmitter power-down in situ, via the receiver, to conserve and extend battery life
• Each transmitter is programmed with one of 12 independent transmitting frequencies
• Transmitter battery is easily recharged using the MLE1006CPS Wireless Continuous Power Supplier, therefore no battery refurbishment is required.

This transmitter is capable of continuous charging/recording.

Compatible Receivers:
The MLE1010 transmitter is programmed with one of 12 independent transmission frequencies and is compatible with the following receivers:

• MLE1051 Biopotential Master Receiver Controller (TR101),
• MLE1051SUB Biopotential Subsidiary Receiver (TR101SUB),
• MLE1135 Pressure and Biopotential Master Receiver Controller (TR135) and
• MLE1135SUB Pressure and Biopotential Subsidiary Receiver (TR135SUB)

Compatible Chargers:
The MLE1010 transmitter contains a rechargeable battery which can record continuously for approximately 11 hours. The transmitter battery is recharged within 4 h, or can be charged continuously for continuous data collection using the MLE1006CPS Wireless Continuous Power Supplier (Small Animal, TR802).

Compatible Telemetry Foundation Systems:

• ML880B103 Telemetry Biopotential Foundation System
• ML880B105 Telemetry Pressure and Biopotential Foundation System

Specifications:
Input & Digitization
Input range:        ±2 mV
Resolution:          12 bit A/D resolution
Sampling:            2 kHz
High pass:           AC coupled, single pole, -3 dB point at 3.4 Hz
Electrode leads:   coiled stainless steel (1mm diameter)
Lead length:         15 cm standard

Battery Charge
Active mode:        11 hours
Standby mode:     6 months
Recharge time:     ~4 h

Transmission
Frequency band:  2.4 GHz ISM band
Data latency:       20 ms
Range:                up to 5 meters
Data integrity:      >97%
Antenna:             Omnidirectional

Physical
Weight:               13 g
Dimensions:        35 x 9 x 23 mm
Case material:     medical grade silicone elastomer

Due to patent restrictions, Telemetry Research products are not available in all regions. Please see note below or contact your ADInstruments representative for more details.

ADInstruments CANNOT sell Telemetry Research BLOOD PRESSURE devices into the following countries (as at August, 2008): Canada, Japan, Germany, Switzerland, Liechtenstein, France, UK, Italy and Netherlands.