Product Description:The Analog ECG Output Adapter (Option R08) is used to convert a digital telemetry ECG signal from a single channel DSI Biopotential Transmitter to an AC coupled analog voltage signal, interfaced to a PowerLab data acquisition system through a BNC connection.
The output from the Analog ECG Output Adapter is an uncalibrated analog voltage signal, which is most commonly used to measure the time between events in an ECG signal, but is not appropriate for determining the waveform amplitude.
Signal Provided:A 1–100 Hz band-pass filtered, uncalibrated Biopotential signal provided as:
1) a 0-10 V analog voltage signal, and
2) a digital telemetry ECG signal via an RJ45 Conductor Cable to the Data Exchange Matrix
Compatible DSI Telemetry Transmitters – with Biopotential• EA-F20
• ETA-F20
• CA-F40
• CTA-F40
• CTA-D70
Supplied with: • 1x 264-0018-001
RJ45 Conductor Cable, 4 meterOrdering and Interface Components:All of the following components are required for connectivity to a PowerLab and collection of analog ECG data from DSI transmitters:
• 1x
PowerLab data acquisition system
• 1x MLAC01
BNC-BNC Cable per RPC-1 receiver
• Compatible DSI Telemetry Transmitter
• 1x 272-6001-001
RPC-1 receiver per DSI Telemetry Transmitter
• 1x 273-0008-001
Analog ECG Output Adapter (Option R08) per RPC-1 receiver
• 1x Data Exchange Matrix OR a BCM100 unit
Note: The DEM unit OR the BCM100 unit can be used to provide power to the Analog Output Adapters and the RPC-1 receiver.