Telemetry Biopotential Transmitter (Small Animal, TR40B)

Overview:

The MLE1010 Telemetry Biopotential Transmitter (TR40B) is suitable for measuring ECG, EEG, EOG, EMG and temperature in small animals ≥200 g (ideally suited to rats).

Compatible Receivers:
The MLE1010 transmitter is programmed with one of 12 independent transmission frequencies and is compatible with the following receivers:

• MLE1051 Biopotential Master Receiver Controller (TR101),
• MLE1051SUB Biopotential Subsidiary Receiver (TR101SUB),
• MLE1135 Pressure and Biopotential Master Receiver Controller (TR135) and
• MLE1135SUB Pressure and Biopotential Subsidiary Receiver (TR135SUB)

Compatible Chargers:
The MLE1010 transmitter contains a rechargeable battery which can record continuously for approximately 11 hours. The transmitter battery is recharged within 4 h, or can be charged continuously for continuous data collection using the MLE1006CPS Wireless Continuous Power Supplier (Small Animal, TR802).

Compatible Telemetry Foundation Systems:

• ML880B103 Telemetry Biopotential Foundation System
• ML880B105 Telemetry Pressure and Biopotential Foundation System

Features:

• Fully implantable
• A high gain amplifier, analog to digital converter (2 kHz sampling frequency and an input range of ±2 mV for the measured biopotential signal)
• Wireless transmission range up to 5 m
• Continuous charging/recording using the MLE1006CPS Wireless Continuous Power Supplier (Small Animal, TR802)
• Transmitter power-down in situ, via the receiver, to conserve and extend battery life
• Each transmitter is programmed with one of 12 independent transmitting frequencies
• Transmitter battery is easily recharged using the MLE1006CPS Wireless Continuous Power Supplier, therefore no battery refurbishment is required.

This transmitter is capable of continuous charging/recording.

Applications:

The MLE1010 Telemetry Biopotential Transmitter (TR40B) is suitable for measuring ECG, EEG, EOG, EMG and temperature in small animals ≥200 g (ideally suited to rats).

Specifications:

Input & Digitization

• Input range: ±2 mV
• Resolution: 12 bit A/D resolution
• Sampling: 2 kHz
• High pass: AC coupled, single pole, -3 dB point at 3.4 Hz
• Electrode leads: coiled stainless steel (1mm diameter)
• Lead length: 15 cm standard

Battery Charge

• Active mode: 11 hours
• Standby mode: 6 months
• Recharge time: ~4 h

Transmission

• Frequency band: 2.4 GHz ISM band
• Data latency: 20 ms
• Range: up to 5 meters
• Data integrity: >97%
• Antenna: Omnidirectional

Physical

• Weight: 13 g
• Dimensions: 35 x 9 x 23 mm
• Case material: medical grade silicone elastomer