Telemetry Biopotential Transmitter (Large Animal, TR70B)

Overview:

The MLE1011 Telemetry Biopotential Transmitter (TR70B) is suitable for measuring ECG, EEG, EOG and EMG and temperature in large animals ≥1.5 kg.

Compatible Receivers:
The MLE1011 transmitter is programmed with one of 12 independent transmission frequencies and is compatible with the following receivers:

• MLE1051 Biopotential Master Receiver Controller (TR101),
• MLE1051SUB Biopotential Subsidiary Receiver (TR101SUB),
• MLE1135 Pressure and Biopotential Master Receiver Controller (TR135) and
• MLE1135SUB Pressure and Biopotential Subsidiary Receiver (TR135SUB)

Compatible Chargers:
The MLE1011 transmitter contains a rechargeable battery which can record continuously for approximately 175 hours. The transmitter battery is recharged within 4 h using the MLE1007WPC Wireless Power Charger (Large Animal, TR871).

Compatible Telemetry Foundation Systems:

• ML880B103 Telemetry Biopotential Foundation System
• ML880B105 Telemetry Pressure and Biopotential Foundation System

Due to patent restrictions, Telemetry Research products are not available in all regions. Please see note below or contact your ADInstruments representative for more details.

ADInstruments CANNOT sell Telemetry Research BLOOD PRESSURE devices into Canada (as at June 2009).

Features:

• Fully implantable
• A high gain amplifier, analog to digital converter (2 kHz sampling frequency and an input range of ±2 mV for the measured biopotential signal)
• Wireless transmission range up to 5 m
• Transmitter power-down in situ, via the receiver, to conserve and extend battery life
• Each transmitter is programmed with one of 12 independent transmitting frequencies
• Transmitter battery is easily recharged using the appropriate wireless power charger,therefore no battery refurbishment is required.

Applications:

The MLE1011 Telemetry Biopotential Transmitter (TR70B) is suitable formeasuring ECG, EEG, EOG and EMG and temperature in large animals ≥1.5kg.

Specifications:

Specifications:

Input & Digitization

• Input range: ±2 mV
• Resolution: 12 bit A/D resolution
• Sampling: 2 kHz
• High pass: AC coupled, single pole, -3 dB point at 3.4 Hz
• Electrode leads: coiled stainless steel (1 mm diameter)
• Lead length: 40 cm standard

Battery Charge

• Active mode: 175 h
• Standby mode: 6 months
• Recharge time: ~4 hours

Transmission

• Frequency band: 2.4 GHz ISM band
• Data latency: 20 ms
• Range: up to 5 meters
• Data integrity: >97%
• Antenna: Omnidirectional

Physical

• Weight: 68 g
• Dimensions: 68 x 15 x 42 mm
• Case material: medical grade silicone elastomer