Telemetry Pressure Transmitter (Small Animal, TR43P)

The MLE1014 Telemetry Pressure Transmitter (TR43P) is suitable for measuring intravascular or intralumenal pressure and temperature in small animals ≥200 g.

MLE1014 transmitter and features:

• Fully implantable
• A high gain amplifier, analog to digital converter (500 Hz sampling and an input range of -20 to +300 mmHg for the measured pressure signal)
• An 8 cm fluid filled and gel tipped catheter
• Wireless transmission range up to 5 m
• Continuous charging/recording using the MLE1006CPS Wireless Continuous Power Supplier (Small Animal, TR802)
• Transmitter power-down in situ, via the receiver, to conserve and extend battery life
• Each transmitter is programmed with one of 12 independent transmitting frequencies
• Transmitter battery is easily recharged using the MLE1006CPS Wireless Continuous Power Supplier, therefore no battery refurbishment is required.

This transmitter is capable of continuous charging/recording.

Compatible Receivers:
The MLE1014 transmitter is programmed with one of 12 independent transmission frequencies and is compatible with the following receivers:

• MLE1131 Pressure Master Receiver Controller (TR131),
• MLE1131SUB Pressure Subsidiary Receiver (TR131SUB),
• MLE1135 Pressure and Biopotential Master Receiver Controller (TR135) and
• MLE1135SUB Pressure and Biopotential Subsidiary Receiver (TR135SUB)

Compatible Chargers:
The MLE1014 transmitter contains a rechargeable battery which can record continuously for approximately 15 hours. The transmitter battery is recharged within 4 h, or can be charged continuously for continuous data collection using the MLE1006CPS Wireless Continuous Power Supplier (Small Animal, TR802).

Compatible Telemetry Foundation Systems:

• ML880B104 Telemetry Pressure Foundation System
• ML880B105 Telemetry Pressure and Biopotential Foundation System

Specifications:
Input & Digitization
Input range:         -20 to +300 mmHg
Resolution:           12 bit A/D resolution
Sampling:             500 Hz
Pressure sensor:   fluid filled with gel tipped catheter
Catheter length:    8 cm

Battery Charge
Active mode:         15 hours
Standby mode:      6 months
Recharge time:      ~4 h

Transmission
Frequency band:    2.4 GHz ISM band
Data latency:         20 ms
Range:                  up to 5 meters
Data integrity:       >97%
Antenna:               Omnidirectional

Physical
Weight:                 13 g
Dimensions:          35 x 9 x 23 mm
Case material:       medical grade silicone elastomer

Due to patent restrictions, Telemetry Research products are not available in all regions. Please see note below or contact your ADInstruments representative for more details.

ADInstruments CANNOT sell Telemetry Research BLOOD PRESSURE devices into the following countries (as at August, 2008): Canada, Japan, Germany, Switzerland, Liechtenstein, France, UK, Italy and Netherlands.