The 16 Channel Bio Amp is a fully isolated, stand-alone biological amplifier that is optimized for the measurement of up to 16 biopotentials on a single subject. It consists of 8 modules, with each module containing two channel amplifiers that share a common ground input. The ground inputs from channels 1 to 8 are internally linked, as are channels 9 to 16. The hardware modules are provided with two ranges (500 µV/5 mV) and filter settings (Low-Pass: 100 Hz/1 kHz; High-Pass: 0.5/2 Hz) that are selected via DIP-switches located at the rear of the unit.
LabChart (or LabChart) software provides further adjustment of the amplifier range and filter settings to suit a variety of biological signals. This bioamplifier is particularly suitable for EEG, ECG/EKG, EMG and/or EOG recordings and can be used for both unipolar and bipolar recordings. It is supplied with a Sub-D to BNC cable for connecting each channel output to PowerLab data acquisition as well as a medical-grade power supply. An
8-Channel Bio Amp is also available.
Electrodes are NOT supplied with the 16-Channel Bio Amp and must be ordered separately. Suitable electrodes and lead wires include the:
Ordering Information:When ordering please specify mains frequency F = 50 or 60 for 50 Hz or 60 Hz mains frequency.
For product specification and a summary of how to use the GT201 download the
technique note. For a guide to the most appropriate bioamplifier configuration to suit your requirements download the
bioamp selection guide.