Get a quote
Thank you for your interest in E Series Electrode Holders. Please complete and submit the form below and an ADInstruments representative will aim to get in touch within one working day. If you’d like to speak to someone immediately, office contact information is available from the contact page.
×Ask a question
Thank you for your interest in E Series Electrode Holders. Please complete and submit the form below and an ADInstruments representative will aim to get in touch within one working day. If you’d like to speak to someone immediately, office contact information is available from the contact page.
×Request a demo
Thank you for your interest in E Series Electrode Holders. Please complete and submit the form below and an ADInstruments representative will aim to get in touch within one working day. If you’d like to speak to someone immediately, office contact information is available from the contact page.
×
E Series Electrode Holders
E45W-F10VH, E45W-F12VH, E45W-F15VH, E45W-F20VH, ESP/W-F10N, ESP/W-F12N, ESP/W-F15N, ESP/W-F20N, ESP-F10N, ESP-F12N, ESP-F15N, ESP-F20N, ESW-F10V, ESW-F12V, ESW-F15V, ESW-F20V,
Configurations
E Series Electrode Holder (Str, Port, Ag Wire, 1.0 mm)
ESW-M10P
Recommended for use with the Differential Amplifier with Active Headstage. Specifications are as follows:
Body Style: straight
Connectors: 2 mm pin
Coupling: Ag Wire
Pressure Port: 2 mm outer diameter polycarbonate
Capillary Glass Size: 1.0 mm outer diameter
E Series Electrode Holder (Str, Port, Ag Wire, 1.2 mm)
ESW-M12P
Recommended for use with the Differential Amplifier with Active Headstage. Specifications are as follows:
Body Style: straight
Connectors: 2 mm pin
Coupling: Ag Wire
Pressure Port: 2 mm outer diameter polycarbonate
Capillary Glass Size: 1.2 mm outer diameter
E Series Electrode Holder (Str, Port, Ag Wire, 1.5 mm)
ESW-M15P
Recommended for use with the Differential Amplifier with Active Headstage. Specifications are as follows:
Body Style: straight
Connectors: 2 mm pin
Coupling: Ag Wire
Pressure Port: 2 mm outer diameter polycarbonate
Capillary Glass Size: 1.5 mm outer diameter
E Series Electrode Holder (Str, Port, Ag Wire, 2.0 mm)
ESW-M20P
Recommended for use with the Differential Amplifier with Active Headstage. Specifications are as follows:
Body Style: straight
Connectors: 2 mm pin
Coupling: Ag Wire
Pressure Port: 2 mm outer diameter polycarbonate
Capillary Glass Size: 2.0 mm outer diameter
E Series Electrode Holder (45°, Vent, Handle, Ag Wire, 1.0 mm)
E45W-F10VH
Recommended to interface the current electrode used in the Oocyte Clamp Amplifier or Complete Oocyte Clamp Workstation. Specifications are as follows:
- Body Style: 45º with anodized aluminum handle (7.9 mm diameter by 6.3 cm length)
- Connector: 2 mm jack
- Coupling: Ag Wire
- Vent: 0.8 mm internal diameter hole
- Capillary Glass Size: 1.0 mm outer diameter
E Series Electrode Holder (45°, Vent, Handle, Ag Wire, 1.2 mm)
E45W-F12VH
Recommended to interface the current electrode used in the Oocyte Clamp Amplifier or Complete Oocyte Clamp Workstation. Specifications are as follows:
- Body Style: 45º with anodized aluminum handle (7.9 mm diameter by 6.3 cm length)
- Connector: 2 mm jack
- Coupling: Ag Wire
- Vent: 0.8 mm internal diameter hole
- Capillary Glass Size: 1.2 mm outer diameter
E Series Electrode Holder (45°, Vent, Handle, Ag Wire, 1.5 mm)
E45W-F15VH
Recommended to interface the current electrode used in the Oocyte Clamp Amplifier or Complete Oocyte Clamp Workstation. Specifications are as follows:
- Body Style: 45º with anodized aluminum handle (7.9 mm diameter by 6.3 cm length)
- Connector: 2 mm jack
- Coupling: Ag Wire
- Vent: 0.8 mm internal diameter hole
- Capillary Glass Size: 1.5 mm outer diameter outer diameter
E Series Electrode Holder (45°, Vent, Handle, Ag Wire, 2.0 mm)
E45W-F20VH
Recommended to interface the current electrode used in the Oocyte Clamp Amplifier or Complete Oocyte Clamp Workstation. Specifications are as follows:
- Body Style: 45º with anodized aluminum handle (7.9 mm diameter by 6.3 cm length)
- Connector: 2 mm jack
- Coupling: Ag Wire
- Vent: 0.8 mm internal diameter hole
- Capillary Glass Size: 2.0 mm outer diameter
E Series Electrode Holder (Str, Ag Wire, 1.0 mm)
ESW-F10N
Recommended for use with the Differential Amplifier with Active Headstage. Specifications are as follows:
- Body Style: straight
- Connectors: 2 mm jack
- Coupling: Ag Wire
- Capillary Glass Size: 1.0 mm outer diameter
E Series Electrode Holder (Str, Ag Wire, 1.2 mm)
ESW-F12N
Recommended for use with the Differential Amplifier with Active Headstage. Specifications are as follows:
- Body Style: straight
- Connectors: 2 mm jack
- Coupling: Ag Wire
- Capillary Glass Size: 1.2 mm outer diameter
E Series Electrode Holder (Str, Ag Wire, 1.5 mm)
ESW-F15N
Recommended for use with the Differential Amplifier with Active Headstage. Specifications are as follows:
- Body Style: straight
- Connectors: 2 mm jack
- Coupling: Ag Wire
- Capillary Glass Size: 1.5 mm outer diameter
E Series Electrode Holder (Str, Ag Wire, 2.0 mm)
ESW-F20N
Recommended for use with the Differential Amplifier with Active Headstage. Specifications are as follows:
Body Style: straight
Connectors: 2 mm jack
Coupling: Ag Wire
Capillary Glass Size: 2.0 mm outer diameter
E Series Electrode Holder (Str, Ag-AgCl Pellet & Wire, 1.0 mm)
ESP/W-F10N
Recommended for use with the Intracellular Electrometer and Intracellular Low Cost Electrometer.
- Body Style: straight
- Connectors: 2 mm jack
- Coupling: Ag Wire and AgCl pellet
- Port: no
- Vent: 0.8 mm internal diameter hole
- Capillary Glass Size: 1.0 mm outer diameter
E Series Electrode Holder (Str, Ag-AgCl Pellet & Wire, 1.2 mm)
ESP/W-F12N
Recommended for use with the Intracellular Electrometer and Intracellular Low Cost Electrometer.
- Body Style: straight
- Connectors: 2 mm jack
- Coupling: Ag Wire and AgCl pellet
- Port: no
- Vent: 0.8 mm internal diameter hole
- Capillary Glass Size: 1.2 mm outer diameter
E Series Electrode Holder (Str, Ag-AgCl Pellet & Wire, 1.5 mm)
ESP/W-F15N
Recommended for use with the Intracellular Electrometer and Intracellular Low Cost Electrometer.
- Body Style: straight
- Connectors: 2 mm jack
- Coupling: Ag Wire and AgCl pellet
- Port: no
- Vent: 0.8 mm internal diameter hole
- Capillary Glass Size: 1.5 mm outer diameter
E Series Electrode Holder (Str, Ag-AgCl Pellet & Wire, 2.0 mm)
ESP/W-F20N
Recommended for use with the Intracellular Electrometer and Intracellular Low Cost Electrometer.
- Body Style: straight
- Connectors: 2 mm jack
- Coupling: Ag Wire and AgCl pellet
- Port: no
- Vent: 0.8 mm internal diameter hole
- Capillary Glass Size: 2.0 mm outer diameter
E Series Electrode Holder (Str, Ag-AgCl Pellet, 1.0 mm)
ESP-F10N
Recommended for use for intracellular recording with ion selective microelectrodes.
- Body Style: straight
- Connectors: 2 mm jack
- Coupling: Ag-AgCl pellet
- Capillary Glass Size: 1.0 mm outer diameter
E Series Electrode Holder (Str, Ag-AgCl Pellet, 1.2 mm)
ESP-F12N
Recommended for use for intracellular recording with ion selective microelectrodes.
- Body Style: straight
- Connectors: 2 mm jack
- Coupling: Ag-AgCl pellet
- Capillary Glass Size: 1.2 mm outer diameter
E Series Electrode Holder (Str, Ag-AgCl Pellet, 1.5 mm)
ESP-F15N
Recommended for use for intracellular recording with ion selective microelectrodes.
- Body Style: straight
- Connectors: 2 mm jack
- Coupling: Ag-AgCl pellet
- Capillary Glass Size: 1.5 mm outer diameter
E Series Electrode Holder (Str, Ag-AgCl Pellet, 2.0 mm)
ESP-F20N
Recommended for use for intracellular recording with ion selective microelectrodes.
- Body Style: straight
- Connectors: 2 mm jack
- Coupling: Ag-AgCl pellet
- Capillary Glass Size: 2.0 mm outer diameter
E Series Electrode Holder (Str, Vent, Ag Wire, 1.0 mm)
ESW-F10V
Recommended for use with the Differential Amplifier with Active Headstage or to interface the voltage probe used in the Oocyte Clamp Amplifier or Complete Oocyte Clamp Workstation. Specifications are as follows:
- Body Style: straight
- Connector: 2 mm jack
- Coupling: Ag Wire
- Vent: 0.8 mm internal diameter hole
- Capillary Glass Size: 1.0 mm outer diameter
E Series Electrode Holder (Str, Vent, Ag Wire, 1.2 mm)
ESW-F12V
Recommended for use with the Differential Amplifier with Active Headstage or to interface the voltage probe used in the Oocyte Clamp Amplifier or Complete Oocyte Clamp Workstation. Specifications are as follows:
- Body Style: straight
- Connector: 2 mm jack
- Coupling: Ag Wire
- Vent: 0.8 mm internal diameter hole
- Capillary Glass Size: 1.2 mm outer diameter
E Series Electrode Holder (Str, Vent, Ag Wire, 1.5 mm)
ESW-F15V
Recommended for use with the Differential Amplifier with Active Headstage or to interface the voltage probe used in the Oocyte Clamp Amplifier or Complete Oocyte Clamp Workstation. Specifications are as follows:
- Body Style: straight
- Connector: 2 mm jack
- Coupling: Ag Wire
- Vent: 0.8 mm internal diameter hole
- Capillary Glass Size: 1.5 mm outer diameter
E Series Electrode Holder (Str, Vent, Ag Wire, 2.0 mm)
ESW-F20V
Recommended for use with the Differential Amplifier with Active Headstage or to interface the voltage probe used in the Oocyte Clamp Amplifier or Complete Oocyte Clamp Workstation. Specifications are as follows:
- Body Style: straight
- Connector: 2 mm jack
- Coupling: Ag Wire
- Vent: 0.8 mm internal diameter hole
- Capillary Glass Size: 2.0 mm outer diameter
E Series Electrode Holders
PRICE ON REQUEST
The E Series Electrode Holders are used for interfacing various neurophysiological recording electrodes to suitable corresponding headstages of extracellular AC/DC pre-amplifiers, and intracellular electrometers.
Overview
The E Series Electrode Holders are used for interfacing various neurophysiological recording electrodes to suitable corresponding headstages of extracellular AC/DC pre-amplifier, intracellular electrometer, intracellular low cost electrometer, and oocyte clamp amplifier. They are machined from high-quality acrylic, then annealed and vapor polished. A variety of styles and sizes are available including:
- fitting to capillary glass size of 1.0, 1.2, 1.5, or 2.0 mm outer diameter
- for use with Ag/AgCl pellet and Ag wire electrodes
- having a straight or 45° body
- having a 2 mm pin or jack connector
- having a port (allows application of pressure/suction) or a vent (allows equalization of internal pressure)
Other styles may be available. Please contact and discuss with your ADInstruments representative.
Configurations
E Series Electrode Holder (Str, Port, Ag Wire, 1.0 mm) copy permalink
https://www.adinstruments.com/products/e-series-electrode-holders#product-ESW-M10P
ESW-M10P
Recommended for use with the Differential Amplifier with Active Headstage. Specifications are as follows:
Body Style: straight
Connectors: 2 mm pin
Coupling: Ag Wire
Pressure Port: 2 mm outer diameter polycarbonate
Capillary Glass Size: 1.0 mm outer diameter
E Series Electrode Holder (Str, Port, Ag Wire, 1.2 mm) copy permalink
https://www.adinstruments.com/products/e-series-electrode-holders#product-ESW-M12P
ESW-M12P
Recommended for use with the Differential Amplifier with Active Headstage. Specifications are as follows:
Body Style: straight
Connectors: 2 mm pin
Coupling: Ag Wire
Pressure Port: 2 mm outer diameter polycarbonate
Capillary Glass Size: 1.2 mm outer diameter
E Series Electrode Holder (Str, Port, Ag Wire, 1.5 mm) copy permalink
https://www.adinstruments.com/products/e-series-electrode-holders#product-ESW-M15P
ESW-M15P
Recommended for use with the Differential Amplifier with Active Headstage. Specifications are as follows:
Body Style: straight
Connectors: 2 mm pin
Coupling: Ag Wire
Pressure Port: 2 mm outer diameter polycarbonate
Capillary Glass Size: 1.5 mm outer diameter
E Series Electrode Holder (Str, Port, Ag Wire, 2.0 mm) copy permalink
https://www.adinstruments.com/products/e-series-electrode-holders#product-ESW-M20P
ESW-M20P
Recommended for use with the Differential Amplifier with Active Headstage. Specifications are as follows:
Body Style: straight
Connectors: 2 mm pin
Coupling: Ag Wire
Pressure Port: 2 mm outer diameter polycarbonate
Capillary Glass Size: 2.0 mm outer diameter
E Series Electrode Holder (45°, Vent, Handle, Ag Wire, 1.0 mm) copy permalink
https://www.adinstruments.com/products/e-series-electrode-holders#product-E45W-F10VH
E45W-F10VH
Recommended to interface the current electrode used in the Oocyte Clamp Amplifier or Complete Oocyte Clamp Workstation. Specifications are as follows:
- Body Style: 45º with anodized aluminum handle (7.9 mm diameter by 6.3 cm length)
- Connector: 2 mm jack
- Coupling: Ag Wire
- Vent: 0.8 mm internal diameter hole
- Capillary Glass Size: 1.0 mm outer diameter
E Series Electrode Holder (45°, Vent, Handle, Ag Wire, 1.2 mm) copy permalink
https://www.adinstruments.com/products/e-series-electrode-holders#product-E45W-F12VH
E45W-F12VH
Recommended to interface the current electrode used in the Oocyte Clamp Amplifier or Complete Oocyte Clamp Workstation. Specifications are as follows:
- Body Style: 45º with anodized aluminum handle (7.9 mm diameter by 6.3 cm length)
- Connector: 2 mm jack
- Coupling: Ag Wire
- Vent: 0.8 mm internal diameter hole
- Capillary Glass Size: 1.2 mm outer diameter
E Series Electrode Holder (45°, Vent, Handle, Ag Wire, 1.5 mm) copy permalink
https://www.adinstruments.com/products/e-series-electrode-holders#product-E45W-F15VH
E45W-F15VH
Recommended to interface the current electrode used in the Oocyte Clamp Amplifier or Complete Oocyte Clamp Workstation. Specifications are as follows:
- Body Style: 45º with anodized aluminum handle (7.9 mm diameter by 6.3 cm length)
- Connector: 2 mm jack
- Coupling: Ag Wire
- Vent: 0.8 mm internal diameter hole
- Capillary Glass Size: 1.5 mm outer diameter outer diameter
E Series Electrode Holder (45°, Vent, Handle, Ag Wire, 2.0 mm) copy permalink
https://www.adinstruments.com/products/e-series-electrode-holders#product-E45W-F20VH
E45W-F20VH
Recommended to interface the current electrode used in the Oocyte Clamp Amplifier or Complete Oocyte Clamp Workstation. Specifications are as follows:
- Body Style: 45º with anodized aluminum handle (7.9 mm diameter by 6.3 cm length)
- Connector: 2 mm jack
- Coupling: Ag Wire
- Vent: 0.8 mm internal diameter hole
- Capillary Glass Size: 2.0 mm outer diameter
E Series Electrode Holder (Str, Ag Wire, 1.0 mm) copy permalink
https://www.adinstruments.com/products/e-series-electrode-holders#product-ESW-F10N
ESW-F10N
Recommended for use with the Differential Amplifier with Active Headstage. Specifications are as follows:
- Body Style: straight
- Connectors: 2 mm jack
- Coupling: Ag Wire
- Capillary Glass Size: 1.0 mm outer diameter
E Series Electrode Holder (Str, Ag Wire, 1.2 mm) copy permalink
https://www.adinstruments.com/products/e-series-electrode-holders#product-ESW-F12N
ESW-F12N
Recommended for use with the Differential Amplifier with Active Headstage. Specifications are as follows:
- Body Style: straight
- Connectors: 2 mm jack
- Coupling: Ag Wire
- Capillary Glass Size: 1.2 mm outer diameter
E Series Electrode Holder (Str, Ag Wire, 1.5 mm) copy permalink
https://www.adinstruments.com/products/e-series-electrode-holders#product-ESW-F15N
ESW-F15N
Recommended for use with the Differential Amplifier with Active Headstage. Specifications are as follows:
- Body Style: straight
- Connectors: 2 mm jack
- Coupling: Ag Wire
- Capillary Glass Size: 1.5 mm outer diameter
E Series Electrode Holder (Str, Ag Wire, 2.0 mm) copy permalink
https://www.adinstruments.com/products/e-series-electrode-holders#product-ESW-F20N
ESW-F20N
Recommended for use with the Differential Amplifier with Active Headstage. Specifications are as follows:
Body Style: straight
Connectors: 2 mm jack
Coupling: Ag Wire
Capillary Glass Size: 2.0 mm outer diameter
E Series Electrode Holder (Str, Ag-AgCl Pellet & Wire, 1.0 mm) copy permalink
https://www.adinstruments.com/products/e-series-electrode-holders#product-ESP/W-F10N
ESP/W-F10N
Recommended for use with the Intracellular Electrometer and Intracellular Low Cost Electrometer.
- Body Style: straight
- Connectors: 2 mm jack
- Coupling: Ag Wire and AgCl pellet
- Port: no
- Vent: 0.8 mm internal diameter hole
- Capillary Glass Size: 1.0 mm outer diameter
E Series Electrode Holder (Str, Ag-AgCl Pellet & Wire, 1.2 mm) copy permalink
https://www.adinstruments.com/products/e-series-electrode-holders#product-ESP/W-F12N
ESP/W-F12N
Recommended for use with the Intracellular Electrometer and Intracellular Low Cost Electrometer.
- Body Style: straight
- Connectors: 2 mm jack
- Coupling: Ag Wire and AgCl pellet
- Port: no
- Vent: 0.8 mm internal diameter hole
- Capillary Glass Size: 1.2 mm outer diameter
E Series Electrode Holder (Str, Ag-AgCl Pellet & Wire, 1.5 mm) copy permalink
https://www.adinstruments.com/products/e-series-electrode-holders#product-ESP/W-F15N
ESP/W-F15N
Recommended for use with the Intracellular Electrometer and Intracellular Low Cost Electrometer.
- Body Style: straight
- Connectors: 2 mm jack
- Coupling: Ag Wire and AgCl pellet
- Port: no
- Vent: 0.8 mm internal diameter hole
- Capillary Glass Size: 1.5 mm outer diameter
E Series Electrode Holder (Str, Ag-AgCl Pellet & Wire, 2.0 mm) copy permalink
https://www.adinstruments.com/products/e-series-electrode-holders#product-ESP/W-F20N
ESP/W-F20N
Recommended for use with the Intracellular Electrometer and Intracellular Low Cost Electrometer.
- Body Style: straight
- Connectors: 2 mm jack
- Coupling: Ag Wire and AgCl pellet
- Port: no
- Vent: 0.8 mm internal diameter hole
- Capillary Glass Size: 2.0 mm outer diameter
E Series Electrode Holder (Str, Ag-AgCl Pellet, 1.0 mm) copy permalink
https://www.adinstruments.com/products/e-series-electrode-holders#product-ESP-F10N
ESP-F10N
Recommended for use for intracellular recording with ion selective microelectrodes.
- Body Style: straight
- Connectors: 2 mm jack
- Coupling: Ag-AgCl pellet
- Capillary Glass Size: 1.0 mm outer diameter
E Series Electrode Holder (Str, Ag-AgCl Pellet, 1.2 mm) copy permalink
https://www.adinstruments.com/products/e-series-electrode-holders#product-ESP-F12N
ESP-F12N
Recommended for use for intracellular recording with ion selective microelectrodes.
- Body Style: straight
- Connectors: 2 mm jack
- Coupling: Ag-AgCl pellet
- Capillary Glass Size: 1.2 mm outer diameter
E Series Electrode Holder (Str, Ag-AgCl Pellet, 1.5 mm) copy permalink
https://www.adinstruments.com/products/e-series-electrode-holders#product-ESP-F15N
ESP-F15N
Recommended for use for intracellular recording with ion selective microelectrodes.
- Body Style: straight
- Connectors: 2 mm jack
- Coupling: Ag-AgCl pellet
- Capillary Glass Size: 1.5 mm outer diameter
E Series Electrode Holder (Str, Ag-AgCl Pellet, 2.0 mm) copy permalink
https://www.adinstruments.com/products/e-series-electrode-holders#product-ESP-F20N
ESP-F20N
Recommended for use for intracellular recording with ion selective microelectrodes.
- Body Style: straight
- Connectors: 2 mm jack
- Coupling: Ag-AgCl pellet
- Capillary Glass Size: 2.0 mm outer diameter
E Series Electrode Holder (Str, Vent, Ag Wire, 1.0 mm) copy permalink
https://www.adinstruments.com/products/e-series-electrode-holders#product-ESW-F10V
ESW-F10V
Recommended for use with the Differential Amplifier with Active Headstage or to interface the voltage probe used in the Oocyte Clamp Amplifier or Complete Oocyte Clamp Workstation. Specifications are as follows:
- Body Style: straight
- Connector: 2 mm jack
- Coupling: Ag Wire
- Vent: 0.8 mm internal diameter hole
- Capillary Glass Size: 1.0 mm outer diameter
E Series Electrode Holder (Str, Vent, Ag Wire, 1.2 mm) copy permalink
https://www.adinstruments.com/products/e-series-electrode-holders#product-ESW-F12V
ESW-F12V
Recommended for use with the Differential Amplifier with Active Headstage or to interface the voltage probe used in the Oocyte Clamp Amplifier or Complete Oocyte Clamp Workstation. Specifications are as follows:
- Body Style: straight
- Connector: 2 mm jack
- Coupling: Ag Wire
- Vent: 0.8 mm internal diameter hole
- Capillary Glass Size: 1.2 mm outer diameter
E Series Electrode Holder (Str, Vent, Ag Wire, 1.5 mm) copy permalink
https://www.adinstruments.com/products/e-series-electrode-holders#product-ESW-F15V
ESW-F15V
Recommended for use with the Differential Amplifier with Active Headstage or to interface the voltage probe used in the Oocyte Clamp Amplifier or Complete Oocyte Clamp Workstation. Specifications are as follows:
- Body Style: straight
- Connector: 2 mm jack
- Coupling: Ag Wire
- Vent: 0.8 mm internal diameter hole
- Capillary Glass Size: 1.5 mm outer diameter
E Series Electrode Holder (Str, Vent, Ag Wire, 2.0 mm) copy permalink
https://www.adinstruments.com/products/e-series-electrode-holders#product-ESW-F20V
ESW-F20V
Recommended for use with the Differential Amplifier with Active Headstage or to interface the voltage probe used in the Oocyte Clamp Amplifier or Complete Oocyte Clamp Workstation. Specifications are as follows:
- Body Style: straight
- Connector: 2 mm jack
- Coupling: Ag Wire
- Vent: 0.8 mm internal diameter hole
- Capillary Glass Size: 2.0 mm outer diameter
E Series Electrode Holder (Str, Port, Ag Wire, 1.0 mm)
ESW-M10P
E Series Electrode Holder (Str, Port, Ag Wire, 1.2 mm)
ESW-M12P
E Series Electrode Holder (Str, Port, Ag Wire, 1.5 mm)
ESW-M15P
E Series Electrode Holder (Str, Port, Ag Wire, 2.0 mm)
ESW-M20P
E Series Electrode Holder (45°, Vent, Handle, Ag Wire, 1.0 mm)
E45W-F10VH
E Series Electrode Holder (45°, Vent, Handle, Ag Wire, 1.2 mm)
E45W-F12VH
E Series Electrode Holder (45°, Vent, Handle, Ag Wire, 1.5 mm)
E45W-F15VH
E Series Electrode Holder (45°, Vent, Handle, Ag Wire, 2.0 mm)
E45W-F20VH
E Series Electrode Holder (Str, Ag Wire, 1.0 mm)
ESW-F10N
E Series Electrode Holder (Str, Ag Wire, 1.2 mm)
ESW-F12N
E Series Electrode Holder (Str, Ag Wire, 1.5 mm)
ESW-F15N
E Series Electrode Holder (Str, Ag Wire, 2.0 mm)
ESW-F20N
E Series Electrode Holder (Str, Ag-AgCl Pellet & Wire, 1.0 mm)
ESP/W-F10N
E Series Electrode Holder (Str, Ag-AgCl Pellet & Wire, 1.2 mm)
ESP/W-F12N
E Series Electrode Holder (Str, Ag-AgCl Pellet & Wire, 1.5 mm)
ESP/W-F15N
E Series Electrode Holder (Str, Ag-AgCl Pellet & Wire, 2.0 mm)
ESP/W-F20N
E Series Electrode Holder (Str, Ag-AgCl Pellet, 1.0 mm)
ESP-F10N
E Series Electrode Holder (Str, Ag-AgCl Pellet, 1.2 mm)
ESP-F12N
E Series Electrode Holder (Str, Ag-AgCl Pellet, 1.5 mm)
ESP-F15N
E Series Electrode Holder (Str, Ag-AgCl Pellet, 2.0 mm)
ESP-F20N
E Series Electrode Holder (Str, Vent, Ag Wire, 1.0 mm)
ESW-F10V
E Series Electrode Holder (Str, Vent, Ag Wire, 1.2 mm)
ESW-F12V
E Series Electrode Holder (Str, Vent, Ag Wire, 1.5 mm)
ESW-F15V
E Series Electrode Holder (Str, Vent, Ag Wire, 2.0 mm)
ESW-F20V
Support
Support Articles
Our Support Articles contain answers to common questions, how-tos, solutions, and documentation.
Training and Workshops
Maximize time and resources with our customized training services delivered at your facility, on your equipment, on your terms.
See Training & Workshops
