Get a quote
Thank you for your interest in Force Transducers. Please complete and submit the form below and an ADInstruments representative will aim to get in touch within one working day. If you’d like to speak to someone immediately, office contact information is available from the contact page.
×Ask a question
Thank you for your interest in Force Transducers. Please complete and submit the form below and an ADInstruments representative will aim to get in touch within one working day. If you’d like to speak to someone immediately, office contact information is available from the contact page.
×Request a demo
Thank you for your interest in Force Transducers. Please complete and submit the form below and an ADInstruments representative will aim to get in touch within one working day. If you’d like to speak to someone immediately, office contact information is available from the contact page.
×
Force Transducers
MLT0402, MLT0420, MLT0201, MLT0201, MLT1030/a, MLT1030/d, MLT0202
Configurations
Force Transducer (2 g)
MLT0402
$2,020.00 USD
- Sensitive isometric force transducer
- Support rod (diameter 6 mm, length 165 mm) is easily adjustable to suit different micropositioners
- Ideal for isolated tissue studies where small forces (~0 g) up to 2 g are expected
- For use with our range of tissue and organ baths
- DIN connector
hourglassShips from Overseas
Estimated delivery time: 1 month.
Force Transducer (20 g)
MLT0420
$1,210.00 USD
- Sensitive isometric force transducer
- Support rod (diameter 6 mm, length 165 mm) is easily adjustable to suit different micropositioners
- Ideal for isolated tissue studies where small forces (~0 g) up to 20 g are expected
- For use with our range of tissue and organ baths
- DIN connector
hourglassShips from Overseas
Estimated delivery time: 3 months.
Force Transducer (5 mg-25 g)
MLT0201
$735.00 USD
- Range of 5 mg to 25 g with a resolution of ±2 mg using a 360 ohm strain gauge
- Ideal for isolated tissue studies
- For use with our range of tissue and organ baths
- DIN connector
hourglassShips from Overseas
Estimated delivery time: 2 months.
Force Transducer (5 mg-25 g) for Radnoti Chambers
MLT0201/RAD
$735.00 USD
- Range of 5 mg to 25 g with a resolution of ±2 mg using a 360 ohm strain gauge
- Ideal for isolated tissue studies
- For use with Radnoti Tissue and Organ baths
- DIN connector
hourglassShips from Overseas
Estimated delivery time: 2 months.
Wide Range Force Transducer (10 mg - 1 kg)
MLT1030/a
$650.00 USD
- Wide-range, semi-isometric, strain-gauge transducer consisting of 5 blades, 4 of which are removable, allowing the stiffness of transducer to be adjusted for the required sensitivity
- Ideal for measuring muscle contractions or similar forces from 10 mg to 1 kg in a wide range of biological preparations involving both large and small animals
- The transducer is suitable for connection to the Bridge Pod (5-pin audio connector).
This product is not currently available for purchase in the EU.
hourglassShips from Overseas
Estimated delivery time: 1 month.
Wide Range Force Transducer (10 mg - 1 kg) with DIN Connector
MLT1030/d
$650.00 USD
- Wide-range, semi-isometric, strain-gauge transducer consisting of 5 blades, 4 of which are removable, allowing the stiffness of transducer to be adjusted for the required sensitivity
- Ideal for measuring muscle contractions or similar forces from 10 mg to 1 kg in a wide range of biological preparations involving both large and small animals
- The transducer is suitable for connection to any ADInstruments Bridge Amp. This transducer is also available with an audio connector suitable for use with a Bridge Pod.
This product is not currently available for purchase in the EU.
hourglassShips from Overseas
Estimated delivery time: 1 month.
Configurations
Force Transducer (2 g)
MLT0402
- Sensitive isometric force transducer
- Support rod (diameter 6 mm, length 165 mm) is easily adjustable to suit different micropositioners
- Ideal for isolated tissue studies where small forces (~0 g) up to 2 g are expected
- For use with our range of tissue and organ baths
- DIN connector
Force Transducer (20 g)
MLT0420
- Sensitive isometric force transducer
- Support rod (diameter 6 mm, length 165 mm) is easily adjustable to suit different micropositioners
- Ideal for isolated tissue studies where small forces (~0 g) up to 20 g are expected
- For use with our range of tissue and organ baths
- DIN connector
Force Transducer (5 mg-25 g)
MLT0201
- Range of 5 mg to 25 g with a resolution of ±2 mg using a 360 ohm strain gauge
- Ideal for isolated tissue studies
- For use with our range of tissue and organ baths
- DIN connector
Force Transducer (5 mg-25 g) for Radnoti Chambers
MLT0201/RAD
- Range of 5 mg to 25 g with a resolution of ±2 mg using a 360 ohm strain gauge
- Ideal for isolated tissue studies
- For use with Radnoti Tissue and Organ baths
- DIN connector
Wide Range Force Transducer (10 mg - 1 kg)
MLT1030/a
- Wide-range, semi-isometric, strain-gauge transducer consisting of 5 blades, 4 of which are removable, allowing the stiffness of transducer to be adjusted for the required sensitivity
- Ideal for measuring muscle contractions or similar forces from 10 mg to 1 kg in a wide range of biological preparations involving both large and small animals
- The transducer is suitable for connection to the Bridge Pod (5-pin audio connector).
This product is not currently available for purchase in the EU.
Wide Range Force Transducer (10 mg - 1 kg) with DIN Connector
MLT1030/d
- Wide-range, semi-isometric, strain-gauge transducer consisting of 5 blades, 4 of which are removable, allowing the stiffness of transducer to be adjusted for the required sensitivity
- Ideal for measuring muscle contractions or similar forces from 10 mg to 1 kg in a wide range of biological preparations involving both large and small animals
- The transducer is suitable for connection to any ADInstruments Bridge Amp. This transducer is also available with an audio connector suitable for use with a Bridge Pod.
This product is not currently available for purchase in the EU.
Force Transducers
$650.00 USD-$2,020.00 USD
Overview
A range of force transducers are available.
For use with:
- Bridge Amps (select configurations with DIN connector)
- Bridge Pods (select configurations with 5-pin audio connector)
Configurations
Force Transducer (2 g) copy permalink
https://www.adinstruments.com/products/force-transducers#product-MLT0402
MLT0402
- Sensitive isometric force transducer
- Support rod (diameter 6 mm, length 165 mm) is easily adjustable to suit different micropositioners
- Ideal for isolated tissue studies where small forces (~0 g) up to 2 g are expected
- For use with our range of tissue and organ baths
- DIN connector
Force Transducer (20 g) copy permalink
https://www.adinstruments.com/products/force-transducers#product-MLT0420
MLT0420
- Sensitive isometric force transducer
- Support rod (diameter 6 mm, length 165 mm) is easily adjustable to suit different micropositioners
- Ideal for isolated tissue studies where small forces (~0 g) up to 20 g are expected
- For use with our range of tissue and organ baths
- DIN connector
Force Transducer (5 mg-25 g) copy permalink
https://www.adinstruments.com/products/force-transducers#product-MLT0201
MLT0201
- Range of 5 mg to 25 g with a resolution of ±2 mg using a 360 ohm strain gauge
- Ideal for isolated tissue studies
- For use with our range of tissue and organ baths
- DIN connector
Force Transducer (5 mg-25 g) for Radnoti Chambers copy permalink
https://www.adinstruments.com/products/force-transducers#product-MLT0201/RAD
MLT0201/RAD
- Range of 5 mg to 25 g with a resolution of ±2 mg using a 360 ohm strain gauge
- Ideal for isolated tissue studies
- For use with Radnoti Tissue and Organ baths
- DIN connector
Wide Range Force Transducer (10 mg - 1 kg) copy permalink
https://www.adinstruments.com/products/force-transducers#product-MLT1030/a
MLT1030/a
- Wide-range, semi-isometric, strain-gauge transducer consisting of 5 blades, 4 of which are removable, allowing the stiffness of transducer to be adjusted for the required sensitivity
- Ideal for measuring muscle contractions or similar forces from 10 mg to 1 kg in a wide range of biological preparations involving both large and small animals
- The transducer is suitable for connection to the Bridge Pod (5-pin audio connector).
This product is not currently available for purchase in the EU.
Wide Range Force Transducer (10 mg - 1 kg) with DIN Connector copy permalink
https://www.adinstruments.com/products/force-transducers#product-MLT1030/d
MLT1030/d
- Wide-range, semi-isometric, strain-gauge transducer consisting of 5 blades, 4 of which are removable, allowing the stiffness of transducer to be adjusted for the required sensitivity
- Ideal for measuring muscle contractions or similar forces from 10 mg to 1 kg in a wide range of biological preparations involving both large and small animals
- The transducer is suitable for connection to any ADInstruments Bridge Amp. This transducer is also available with an audio connector suitable for use with a Bridge Pod.
This product is not currently available for purchase in the EU.
Force Transducer (2 g)
MLT0402
Force Transducer (20 g)
MLT0420
Force Transducer (5 mg-25 g)
MLT0201
Force Transducer (5 mg-25 g) for Radnoti Chambers
MLT0201/RAD
Wide Range Force Transducer (10 mg - 1 kg)
MLT1030/a
Wide Range Force Transducer (10 mg - 1 kg)
MLT1030/a
Support
Support Articles
Our Support Articles contain answers to common questions, how-tos, solutions, and documentation.
Training and Workshops
Maximize time and resources with our customized training services delivered at your facility, on your equipment, on your terms.
See Training & WorkshopsDetails and Tech Specs
Product Codes
Data Cards
Compatibility
MLT0402
| Operating System | Recommended Hardware | Alternate Hardware | |
| LabChart Lightning | Mac/Windows | Bridge Amps + PowerLab C + Instrument Interface | Bridge Amps + Traditional PowerLab |
| LabChart 8 | Mac/Windows | Bridge Amps + PowerLab C + Instrument Interface | Bridge Amps + Traditional PowerLab |
