
Intracardiac Electrophysiology Stimulator/Amplifier
The Intracardiac Electrophysiology Stimulator/Amplifier is an integrated stimulator and amplifier that is specifically designed to work with Millar electrophysiology catheters and a PowerLab data acquisition system for in vivo or in vitro intracardiac electrophysiology studies.
Overview
The Intracardiac Electrophysiology Stimulator/Amplifier is an integrated stimulator and amplifier that is specifically designed to work with Millar electrophysiology catheters (purchase separately) and a PowerLab data acquisition system for in vivo or in vitro intracardiac electrophysiology studies.
It is supplied with 1 m long cables that connect each analog output at the back of the stimulator/amplifier to a PowerLab BNC input
Other features include providing:
- up to eight current and voltage-driven electrical stimulation channels
- up to eight amplifier channels and software selectable gains
- a TTL trigger for synchronization or basic communications with external devices
- powerful MC_Stimulus II software with advanced features
The stimulator/amplifier requires the EPR Catheter Interface Cable (Redel, GND, 3 ft), for connecting an electrophysiology catheter to the stimulator/amplifier, and the EP Grounding Kit (Cable Set), for grounding purposes. Both cables are available and purchase separately. Additionally, a EPR Connecting Cable (Redel to Redel, 3ft) can also be purchased, if further extension between the stimulator/amplifier and the electrophysiology catheter is required. The stimulator/amplifier and relevant interfacing cables are also supplied when purchasing the Cardiac Electrophysiology System.
Support
Support Articles
Our Support Articles contain answers to common questions, how-tos, solutions, and documentation.
Training and Workshops
Maximize time and resources with our customized training services delivered at your facility, on your equipment, on your terms.
Details and Tech Specs
Technical
Stimulator Features
- up to 8 analog voltage outputs: -8 V to +8 V @ ±20 mA (Redel connector, 14 pins)
- up to 8 analog current outputs: -1.6 mA to +1.6 mA @ 120 V (Redel connector, 14 pins)
- 1 TTL trigger input (TRIG IN, Lemo connector)
- 1 TTL trigger output (SYNC OUT, Lemo connector)
- Time resolution (20 µs)
Amplifier Features
- Up to 8 channels (Lemo connectors)
- Input voltage range of ± 500 mV
- Input noise < 1 μV RMS (full bandwidth, inputs short circuited)
- Gain selectable via software (100, 200, 500 or 1000)
- Bandpass filter (1 Hz to 2.2 kHz)
MC_Stimulus II software (supplied) Features
- High speed USB 2.0 communication
- Freely programmable stimulation output signals (rectangular, ramp, sinus, arbitrary)
- Works with operating system Microsoft Windows ® 7, Vista or XP with NTFS
General Features
- Includes a 2 years maintenance package (software updates and support)
- Provides electrical isolation from mains supply voltage 100-240 VAC
- Made in Germany (CE Mark)