Panlab Multi Chamber Organ Baths
Two-, Four- and Eight-Chamber Organ Baths that include pre-heating reservoir coils, gas diffusers, tissue holders, micropositioners, a water pump and thermostat controller.
Overview
Include tissue chambers, pre-heating reservoir coils, gas diffusers, tissue holders, micropositioners, a water pump and thermostat controller (not shown). Please note that isometric and isotonic force transducers are not included but are available for purchase for use with these organ baths.
A variety of tissue chamber volumes are available (5, 10, 25 and 50 mL). Tissue chambers and reservoir coils are located inside a thick perspex-walled water bath to maintain a constant temperature. With all components contained within the bath this ensures that the temperature within the tissue chambers does not fluctuate when refilling. Each reservoir coil has a capacity of approximately 60 mL – enough for even the largest tissue chamber.
The solid design, combined with the mass of the water bath minimizes vibration. Each tissue chamber has an adjustable gas diffuser for oxygenation and push buttons on the front of the unit control the filling and emptying of the tissue chambers via electrovalves.
Note that multiple chamber Panlab Organ Bath Systems are also available, which include: PowerLab systems, Bridge Amps, organ baths, thermostat controller and isometric force transducers.
Related
Research Applications
Key Features
- All-in-one design provides a compact portable unit.
- 25 mL tissue chambers as standard (5, 10 and 50 mL chambers are also available on request).
- Electrovalves automatically fill and empty tissue chambers.
- A heating rod built into each of the units.
- A thermostat controller for control the water temperature surrounding the tissue chambers.
- Pre-heating reservoir coils positioned within the water bath to heat the perfusate before entering the tissue chamber.
- Water pump built into the water bath to circulate the heated water and ensure even heat distribution throughout the entire system.
- Manipulators/micropositioners for accurate positioning of the transducers and applying pre-tension to the tissue preparations prior to experimentation.
Support
Support Articles
Our Support Articles contain answers to common questions, how-tos, solutions, and documentation.
Training and Workshops
Maximize time and resources with our customized training services delivered at your facility, on your equipment, on your terms.
Details and Tech Specs
Technical
Ordering Information
When ordering the Panlab Organ Bath System please specify the following:
- Mains Power (V) = 115 for 110-115 V or 220 for 220-240 V
- Tissue chamber size (C) = 5, 10, 25 or 50 mL
|
Chamber Capacities |
5, 10, 25 or 50 mL |
|
Coil Capacity |
180 mL |
|
Temperature Range |
Room temperature +3 ºC to 50 ºC (protection); Resolution 0.1 ºC |
|
Temperature Stability |
+/- 0.1 ºC in the whole water heat tank |
|
Power Supply |
115-220 V, 50-60 Hz; Consumption 1000 W |
| Tissue Chamber Dimensions | ||
|
Volume (mL) |
Total Height (mm) |
Internal Diameter (mm) |
|
50 |
126 |
28 |
|
25 |
126 |
20 |
|
10 |
126 |
14 |
|
5 |
126 |
11 |
