How do I replace the fuse on the Powerpack of the FE180 and FE155?

The ADInstruments' Stimulus Isolator (FE180) and High Current stimulator (FE155) both have an external power supply.  On occasions it may be necessary to replace the fuse in the unit.

 

To do this carry out the following steps:

 

Step 1. Insert small screw driver into narrow slot inside connector:

 

 

   

 

 

 

 

 

 

Step2. Slide out fuse drawer:

 


   

 

 

 

 

 

 

 

Step 3. Replace fuse (Fuse Rating 250mA, 250V) and then push drawer back into power supply:

 

 

 

 

 

 

 

 

 

NB. Please also check the voltage switch on the power supply is set correctly for your region (115/220V)

For further technical assistance with this or any other issue, please contact ADInstruments Technical Support by clicking HERE