With which PowerLabs and LabChart Software version are the latest Bridge Amps compatible?

The latest models of Single and Quad Bridge Amplifier (FE221 and FE224) will work with the following PowerLabs:
  • /SP series
  • /25 series
  • /26 series
  • /26T series with MLAC22 adapters 
  • /30 series
  • /35 series
For the Octal Bridge Amplifier (FE228) you will need an 8 or 16 channel version of the following PowerLabs:
  • /SP series
  • /30 series
  • /35 series
In addition, you will need to make sure that you have the correct version of LabChart software.  The most recent version would be the best to use, however you must have a minimum of Chart 5.4.2.  Earlier versions of Chart 5 and Chart 4 cannot be used with the modern amplifiers.
Please note that the PowerLab /SP and /ST series are no longer supported, and are not compatible with LabChart 8. If you have a /SP or /ST series PowerLab, you will need to continue to use LabChart 7.3.7.