Get a quote
Thank you for your interest in DIN Cables and Adapters. Please complete and submit the form below and an ADInstruments representative will aim to get in touch within one working day. If you’d like to speak to someone immediately, office contact information is available from the contact page.
×Ask a question
Thank you for your interest in DIN Cables and Adapters. Please complete and submit the form below and an ADInstruments representative will aim to get in touch within one working day. If you’d like to speak to someone immediately, office contact information is available from the contact page.
×Request a demo
Thank you for your interest in DIN Cables and Adapters. Please complete and submit the form below and an ADInstruments representative will aim to get in touch within one working day. If you’d like to speak to someone immediately, office contact information is available from the contact page.
×
DIN Cables and Adapters
MLAC13, MLAC25, MLAC06, MLAC32, MLAC3
Configurations
DIN 8 Plug to BNC Cable (2 m)
MLAC25
$33.00 USD
A DIN (8 socket) to BNC Cable (2 m) used to connect any device with a BNC output to the Pod port input of a PowerLab.
Special restrictions apply to the PowerLab 26T:
- This cable CAN be used to connect any ADInstruments Signal Conditioner (but not Pods) to Inputs 3 or 4 pod ports.
- It CANNOT be used to connect the analog output of a third party device to Inputs 3 or 4 pod ports - for this you will require the BNC to DIN Smart Adapter and BNC to BNC cables.
checkmarkShips from USA
Estimated delivery time: 2-5 business days.
Din to Audio Adapter Cable
MLAC32
$40.00 USD
A DIN (8 socket) to Audio (5 pin) adapter cable used to attach transducers (with DIN plugs) to the ML301 Bridge Pod.
The cable is 200 mm long.
hourglassShips from Overseas
Estimated delivery time: 2 weeks.
DIN to DIN Smart Adapter
MLAC31
$50.00 USD
Allows inputs 3 & 4 on the PowerLab 26T to connect to transducers (with DIN plugs) or any other external devices with DIN connections.
hourglassShips from Overseas
Estimated delivery time: 2 weeks.
DIN(8) Extension Cable (3 m)
MLAC13
$44.00 USD
A DIN (8-pin) to DIN (8-socket) extension cable (3 m).
hourglassShips from Overseas
Estimated delivery time: 2 weeks.
DIN(8) to Disposable BP Transducer
MLAC06
$130.00 USD
Used to connect either the Disposable BP Transducer (no stopcock) or Disposable BP Transducer (stopcock) to any ADInstruments Bridge Amp.
checkmarkShips from USA
Estimated delivery time: 2-5 business days.
Configurations
DIN 8 Plug to BNC Cable (2 m)
MLAC25
A DIN (8 socket) to BNC Cable (2 m) used to connect any device with a BNC output to the Pod port input of a PowerLab.
Special restrictions apply to the PowerLab 26T:
- This cable CAN be used to connect any ADInstruments Signal Conditioner (but not Pods) to Inputs 3 or 4 pod ports.
- It CANNOT be used to connect the analog output of a third party device to Inputs 3 or 4 pod ports - for this you will require the BNC to DIN Smart Adapter and BNC to BNC cables.
Din to Audio Adapter Cable
MLAC32
A DIN (8 socket) to Audio (5 pin) adapter cable used to attach transducers (with DIN plugs) to the ML301 Bridge Pod.
The cable is 200 mm long.
DIN to DIN Smart Adapter
MLAC31
Allows inputs 3 & 4 on the PowerLab 26T to connect to transducers (with DIN plugs) or any other external devices with DIN connections.
DIN(8) Extension Cable (3 m)
MLAC13
A DIN (8-pin) to DIN (8-socket) extension cable (3 m).
DIN(8) to Disposable BP Transducer
MLAC06
Used to connect either the Disposable BP Transducer (no stopcock) or Disposable BP Transducer (stopcock) to any ADInstruments Bridge Amp.
DIN Cables and Adapters
$33.00 USD-$130.00 USD
Overview
A range of DIN cables and adapters are available.
Configurations
DIN 8 Plug to BNC Cable (2 m) copy permalink
https://www.adinstruments.com/products/din-cables-and-adapters#product-MLAC25
MLAC25
A DIN (8 socket) to BNC Cable (2 m) used to connect any device with a BNC output to the Pod port input of a PowerLab.
Special restrictions apply to the PowerLab 26T:
- This cable CAN be used to connect any ADInstruments Signal Conditioner (but not Pods) to Inputs 3 or 4 pod ports.
- It CANNOT be used to connect the analog output of a third party device to Inputs 3 or 4 pod ports - for this you will require the BNC to DIN Smart Adapter and BNC to BNC cables.
Din to Audio Adapter Cable copy permalink
https://www.adinstruments.com/products/din-cables-and-adapters#product-MLAC32
MLAC32
A DIN (8 socket) to Audio (5 pin) adapter cable used to attach transducers (with DIN plugs) to the ML301 Bridge Pod.
The cable is 200 mm long.
DIN to DIN Smart Adapter copy permalink
https://www.adinstruments.com/products/din-cables-and-adapters#product-MLAC31
MLAC31
Allows inputs 3 & 4 on the PowerLab 26T to connect to transducers (with DIN plugs) or any other external devices with DIN connections.
DIN(8) Extension Cable (3 m) copy permalink
https://www.adinstruments.com/products/din-cables-and-adapters#product-MLAC13
MLAC13
A DIN (8-pin) to DIN (8-socket) extension cable (3 m).
DIN(8) to Disposable BP Transducer copy permalink
https://www.adinstruments.com/products/din-cables-and-adapters#product-MLAC06
MLAC06
Used to connect either the Disposable BP Transducer (no stopcock) or Disposable BP Transducer (stopcock) to any ADInstruments Bridge Amp.
DIN 8 Plug to BNC Cable (2 m)
MLAC25
Din to Audio Adapter Cable
MLAC32
DIN to DIN Smart Adapter
MLAC31
DIN(8) Extension Cable (3 m)
MLAC13
DIN(8) to Disposable BP Transducer
MLAC06
Support
Support Articles
Our Support Articles contain answers to common questions, how-tos, solutions, and documentation.
Training and Workshops
Maximize time and resources with our customized training services delivered at your facility, on your equipment, on your terms.
See Training & Workshops
