Millar Pressure System
Overview
Millar offers a two-channel amplifier/interface unit to support animal research.
The Millar Pressure System (MPS-2000) acts as an interface between either one dual-pressure, or two single-pressure Mikro-TipTM pressure catheters, an Instrument Interface and LabChart analysis software option, for animal research applications only. It is CE approved and RoHS compliant.
Required Products:
- To connect each of the pressure outputs to the Instrument Interface inputs, two BNC to Audio plugs (6.5 mm (1/4"), 2m) need to be purchased separately.
- Millar pressure catheters also require a Viking connector or low-profile connector Interface Cable for use with either Millar Pressure Interface option.
Related
Research Applications
Signals
Support
Support Assistant
Our Support Assistant can answer common questions and provide solutions.
Go to Support AssistantTraining and Workshops
Maximize time and resources with our customized training services delivered at your facility, on your equipment, on your terms.
See Training & WorkshopsDetails and Tech Specs
Technical
- Inputs (input channel 1 and input channel 2) are electrically isolated.
- The amplifier provides bridge excitation voltage, separate balance (zero) controls and lighted push buttons for electronic calibrations of 0, 25, 100 or 125 mmHg for both channels.
- Pressure outputs have a sensitivity of 1V/100mmHg
- The amplifier provides bridge excitation voltage, separate balance (zero) controls and lighted push buttons for electronic calibrations of 0, 25, 100 or 125 mmHg for both channels.
- Allows selection of standby mode to verify zero and calibration.
- The output connectors are standard 1⁄4-inch phone jacks. Output cables are not provided.
Product Code
Compatibility
MPS-2000
| Operating System | Recommended Hardware | Alternate Hardware | |
|---|---|---|---|
| LabChart Lightning | LabChart Lightning Windows / LabChart Lightning Mac | PowerLab C + PLCI1 | Traditional PowerLab |
| LabChart 8 | Windows / LabChart 8 Mac | PowerLab C + PLCI1 | Traditional PowerLab |
Requirements
To connect each of the pressure outputs to the Instrument Interface inputs, two BNC to Audio plugs (6.5 mm (1/4"), 2m) need to be purchased separately.
Millar pressure catheters also require a Viking connector or low-profile connector Interface Cable for use with either Millar Pressure Interface option.
