Thank you for your interest in Catheter Interface Cables. Please complete and submit the form below and an ADInstruments representative will aim to get in touch within one working day. If you’d like to speak to someone immediately, office contact information is available from the contact page.
×Thank you for your interest in Catheter Interface Cables. Please complete and submit the form below and an ADInstruments representative will aim to get in touch within one working day. If you’d like to speak to someone immediately, office contact information is available from the contact page.
×Thank you for your interest in Catheter Interface Cables. Please complete and submit the form below and an ADInstruments representative will aim to get in touch within one working day. If you’d like to speak to someone immediately, office contact information is available from the contact page.
×AEC-10D
$299.00 USD
A 3 m (10 ft) cable that connects a single Millar Mikro-Tip pressure catheter with a Low-Profile connector type (flat with 4 pins) to any ADInstruments Bridge Amp.
checkmarkShips from USA
Estimated delivery time: 2-5 business days.
TEC-10D
$245.00 USD
A 3 m (10 ft) cable that connects a single Millar Mikro-Tip pressure catheter with a Low-Profile connector type (flat with 4 pins) to a Pressure Control Unit.
checkmarkShips from USA
Estimated delivery time: 2-5 business days.
PEC-10D
$299.00 USD
A 3 m (10 ft) cable that connects a single Millar Mikro-Tip pressure catheter with a Low-Profile connector type (flat with 4 pins) to compatible amplifiers with a Redel input connector, such as:
checkmarkShips from USA
Estimated delivery time: 2-5 business days.
PEC-4d
$294.00 USD
A 1.2 m (4 ft) cable that connects a single Millar Mikro-Tip pressure catheter with a Low-Profile connector type (flat with 4 pins) to compatible amplifiers with a Redel input connector, such as:
hourglassShips from Overseas
Estimated delivery time: 1 month.
AEC-10C
$421.00 USD
Connects any Mikro-Tip transducer with a Viking connector type to any ADInstruments Bridge Amp, such as the Non Invasive Pulse Tonometer. (Note that most Millar Mikro-Tip Catheters are now manufactured with a Low Profile connector.)
checkmarkShips from USA
Estimated delivery time: 2-5 business days.
TEC-10C
$376.00 USD
Connects any Mikro-Tip transducer with a Viking connector type to a Pressure Control Unit, such as the Non Invasive Pulse Tonometer. (Note that most Millar Mikro-Tip Catheters are now manufactured with a Low Profile connector.)
hourglassShips from Overseas
Estimated delivery time: 1 month.
PEC-10C
$421.00 USD
Connects any Mikro-Tip transducer with a Viking connector type to a Pressure Signal Conditioner, such as the Non Invasive Pulse Tonometer. (Note that most Millar Mikro-Tip Catheters are now manufactured with a Low Profile connector.)
hourglassShips from Overseas
Estimated delivery time: 1 month.
AEC-10D
A 3 m (10 ft) cable that connects a single Millar Mikro-Tip pressure catheter with a Low-Profile connector type (flat with 4 pins) to any ADInstruments Bridge Amp.
TEC-10D
A 3 m (10 ft) cable that connects a single Millar Mikro-Tip pressure catheter with a Low-Profile connector type (flat with 4 pins) to a Pressure Control Unit.
PEC-10D
A 3 m (10 ft) cable that connects a single Millar Mikro-Tip pressure catheter with a Low-Profile connector type (flat with 4 pins) to compatible amplifiers with a Redel input connector, such as:
PEC-4d
A 1.2 m (4 ft) cable that connects a single Millar Mikro-Tip pressure catheter with a Low-Profile connector type (flat with 4 pins) to compatible amplifiers with a Redel input connector, such as:
AEC-10C
Connects any Mikro-Tip transducer with a Viking connector type to any ADInstruments Bridge Amp, such as the Non Invasive Pulse Tonometer. (Note that most Millar Mikro-Tip Catheters are now manufactured with a Low Profile connector.)
TEC-10C
Connects any Mikro-Tip transducer with a Viking connector type to a Pressure Control Unit, such as the Non Invasive Pulse Tonometer. (Note that most Millar Mikro-Tip Catheters are now manufactured with a Low Profile connector.)
PEC-10C
Connects any Mikro-Tip transducer with a Viking connector type to a Pressure Signal Conditioner, such as the Non Invasive Pulse Tonometer. (Note that most Millar Mikro-Tip Catheters are now manufactured with a Low Profile connector.)
$245.00 USD-$421.00 USD
A range of catheter interface cables compatible with Millar Mikro-Tip pressure catheters.
Millar Mikro-Tip pressure catheters can be interfaced with a range of appropriate amplifiers via a compatible catheter interface cable. Hardware includes:
A range of compatible catheter interface cables is listed here.
https://www.adinstruments.com/products/catheter-interface-cables#product-AEC-10D
AEC-10D
A 3 m (10 ft) cable that connects a single Millar Mikro-Tip pressure catheter with a Low-Profile connector type (flat with 4 pins) to any ADInstruments Bridge Amp.
https://www.adinstruments.com/products/catheter-interface-cables#product-TEC-10D
TEC-10D
A 3 m (10 ft) cable that connects a single Millar Mikro-Tip pressure catheter with a Low-Profile connector type (flat with 4 pins) to a Pressure Control Unit.
https://www.adinstruments.com/products/catheter-interface-cables#product-PEC-10D
PEC-10D
A 3 m (10 ft) cable that connects a single Millar Mikro-Tip pressure catheter with a Low-Profile connector type (flat with 4 pins) to compatible amplifiers with a Redel input connector, such as:
https://www.adinstruments.com/products/catheter-interface-cables#product-PEC-4d
PEC-4d
A 1.2 m (4 ft) cable that connects a single Millar Mikro-Tip pressure catheter with a Low-Profile connector type (flat with 4 pins) to compatible amplifiers with a Redel input connector, such as:
https://www.adinstruments.com/products/catheter-interface-cables#product-AEC-10C
AEC-10C
Connects any Mikro-Tip transducer with a Viking connector type to any ADInstruments Bridge Amp, such as the Non Invasive Pulse Tonometer. (Note that most Millar Mikro-Tip Catheters are now manufactured with a Low Profile connector.)
https://www.adinstruments.com/products/catheter-interface-cables#product-TEC-10C
TEC-10C
Connects any Mikro-Tip transducer with a Viking connector type to a Pressure Control Unit, such as the Non Invasive Pulse Tonometer. (Note that most Millar Mikro-Tip Catheters are now manufactured with a Low Profile connector.)
https://www.adinstruments.com/products/catheter-interface-cables#product-PEC-10C
PEC-10C
Connects any Mikro-Tip transducer with a Viking connector type to a Pressure Signal Conditioner, such as the Non Invasive Pulse Tonometer. (Note that most Millar Mikro-Tip Catheters are now manufactured with a Low Profile connector.)
Our Support Articles contain answers to common questions, how-tos, solutions, and documentation.
Maximize time and resources with our customized training services delivered at your facility, on your equipment, on your terms.
See Training & Workshops