Pod Expander
Get a quote
Thank you for your interest in Pod Expander. Please complete and submit the form below and an ADInstruments representative will aim to get in touch within one working day. If you’d like to speak to someone immediately, office contact information is available from the contact page.
×Ask a question
Thank you for your interest in Pod Expander. Please complete and submit the form below and an ADInstruments representative will aim to get in touch within one working day. If you’d like to speak to someone immediately, office contact information is available from the contact page.
×Request a demo
Thank you for your interest in Pod Expander. Please complete and submit the form below and an ADInstruments representative will aim to get in touch within one working day. If you’d like to speak to someone immediately, office contact information is available from the contact page.
×
Pod Expander
FE305
Pod Expander
$945.00 USD
Product code: FE305
The Pod Expander is a front-end designed to provide Pod support on MacLab and PowerLab models that do not have built-in Pod connections. It provides 4 Pod inputs and is compatible with all Pod models.
hourglassShips from Overseas
Estimated delivery time: 3 weeks.
The Pod Expander is a front-end designed to provide Pod support on MacLab and PowerLab models that do not have built-in Pod connections. It provides 4 Pod inputs and is compatible with all Pod models.
Note that some early MacLab and PowerLab systems manufactured before December 1997 do not support the operation of the Pod Expander.
Features
- The ability to add up to four Pod devices to a MacLab or PowerLab hardware unit that has no built in Pod support.
- The necessary switching and power distribution for each Pod.
- Software-control, the software will periodically scan each Pod input on the Pod Expander to see if a Pod is attached. If it finds one, the Pod will be installed on that channel.
Product Code
Technical
- Maximum number of Pods: 4
- Internal gain: x 1 (internal differential buffering)
- Output voltage: Same as Pod output voltage (±5 V max)
- Input configuration: Differential (fixed)
- Input impedance: ~1 MΩ
- Frequency response: DC – 25 kHz nominal
- Max. input voltage ±10 V
- DC drift: 3 μV/°C
- Pod power supply: ±5 V, 100 mA maximum per supply rail
- Operating conditions: 0 – 35 °C, 0 – 90 % humidity (non-condensing)
- Input connector: 8-pin DIN
- Dimensions (h × w × d): 70 mm × 240 mm × 260 mm (2.76" × 9.45" × 10.2")
- Weight: 2.0 kg (~4.4 lb)
- Operating temperature range: 0 to 90 % humidity (non-condensing)
All specifications were tested at the time of printing and are subject to change.
Requirements
The following versions of software are required for the Pod Expander and Pod support:
| Windows |
|---|
| LabChart v 6 or later |
| Chart v 3.4.8 or later |
| Scope v 3.6.3 or later |
| Macintosh |
|---|
| LabChart v 6 or later |
| Chart v 3.6.3 or later |
| Scope v 3.6.3 or later |
Note: Earlier software versions do not support the Pod Expander or Pods.
