No. The perivascular flowprobe should never be autoclaved.
After use, thoroughly wash the perivascular probe and its reflector bracket in soap and warm water (≤ 55°C, 130°F). Remove any visible foreign material with a soft-bristled brush. The probe may be rinsed and wiped in 90% ethanol alcohol. STERRAD or standard hospital cold (≤ 60°C, 140°F) ethylene oxide gas sterilization is acceptable.
Ensure probe connector is not submerged in the water/solution. They may be cleaned with alcohol-wipes.
For further technical assistance with this or any other issue, please contact ADInstruments Technical Support by clicking HERE.