Get a quote
Thank you for your interest in Isotonic Transducers. Please complete and submit the form below and an ADInstruments representative will aim to get in touch within one working day. If you’d like to speak to someone immediately, office contact information is available from the contact page.
×Ask a question
Thank you for your interest in Isotonic Transducers. Please complete and submit the form below and an ADInstruments representative will aim to get in touch within one working day. If you’d like to speak to someone immediately, office contact information is available from the contact page.
×Request a demo
Thank you for your interest in Isotonic Transducers. Please complete and submit the form below and an ADInstruments representative will aim to get in touch within one working day. If you’d like to speak to someone immediately, office contact information is available from the contact page.
×
Isotonic Transducers
MLT7006, MLT0015, MLT1040
Configurations
Hall Effect Isotonic Transducer
MLT7006
$2,550.00 USD
A low inertia, high-performance isotonic transducer suitable for investigating isotonic contractions in isolated organs and tissue. Attachement of this transducer requires a certain distance from the lab stand rod, thus making our range of Radnoti Organ Baths ideal when purchased with specialised extended chamber and tissue support holders. Please contact your ADInstruments Representative for more information.
The Hall Effect Isotonic Transducer features:
- a finely adjustable counterweight
- accurate measurement of displacements with preadjusted loads of as small as 100 - 200 mg
- an operating range of ± 15º
- a voltage output of 300µV per mm displacement of the lever arm tip.
It directly connects to any ADInstruments Bridge Amp, Quad Bridge Amp or Octal Bridge Amp. Discontinued ML110, ML112, ML221, ML224 and ML228 Bridge Amps are also compatible.
hourglassShips from Overseas
Estimated delivery time: 1 month.
High Grade Isotonic Transducer
MLT0015
$1,195.00 USD
The High Grade Isotonic Transducer is a high performance isotonic transducer, suitable for the measurement of displacements with preadjusted loads in the range of ±15°.
Recommended for use with our range of Research or Teaching Tissue/Organ Bath models and is suitable for connection to the Bridge Amp, Quad Bridge Amp and Octal Bridge Amp. It also operates with the discontinued ML110 and ML112 Bridge Amps.
Please note: it does not operate with the discontinued ML118 Quad Bridge Amp or ML119 Octal Bridge Amp.
hourglassShips from Overseas
Estimated delivery time: 1 month.
Semi-Isotonic Transducer
MLT1040
$550.00 USD
The Semi-Isotonic Transducer is a cantilever beam device capable of measuring small movements in physiological preparations with a range of 10-100 mm. The Nickel-plated steel lever can be placed in any position, offering great flexibility. It features high linearity and nearly isotonic characteristics.
This transducer is supplied with an 8-pin DIN connector and can be used with any ADInstruments Bridge Amp.
This product is not currently available for purchase in the EU.
hourglassShips from Overseas
Estimated delivery time: 1 month.
Configurations
Hall Effect Isotonic Transducer
MLT7006
A low inertia, high-performance isotonic transducer suitable for investigating isotonic contractions in isolated organs and tissue. Attachement of this transducer requires a certain distance from the lab stand rod, thus making our range of Radnoti Organ Baths ideal when purchased with specialised extended chamber and tissue support holders. Please contact your ADInstruments Representative for more information.
The Hall Effect Isotonic Transducer features:
- a finely adjustable counterweight
- accurate measurement of displacements with preadjusted loads of as small as 100 - 200 mg
- an operating range of ± 15º
- a voltage output of 300µV per mm displacement of the lever arm tip.
It directly connects to any ADInstruments Bridge Amp, Quad Bridge Amp or Octal Bridge Amp. Discontinued ML110, ML112, ML221, ML224 and ML228 Bridge Amps are also compatible.
High Grade Isotonic Transducer
MLT0015
The High Grade Isotonic Transducer is a high performance isotonic transducer, suitable for the measurement of displacements with preadjusted loads in the range of ±15°.
Recommended for use with our range of Research or Teaching Tissue/Organ Bath models and is suitable for connection to the Bridge Amp, Quad Bridge Amp and Octal Bridge Amp. It also operates with the discontinued ML110 and ML112 Bridge Amps.
Please note: it does not operate with the discontinued ML118 Quad Bridge Amp or ML119 Octal Bridge Amp.
Semi-Isotonic Transducer
MLT1040
The Semi-Isotonic Transducer is a cantilever beam device capable of measuring small movements in physiological preparations with a range of 10-100 mm. The Nickel-plated steel lever can be placed in any position, offering great flexibility. It features high linearity and nearly isotonic characteristics.
This transducer is supplied with an 8-pin DIN connector and can be used with any ADInstruments Bridge Amp.
This product is not currently available for purchase in the EU.
Isotonic Transducers
$550.00 USD-$2,550.00 USD
These isotonic transducers are suitable for investigating isotonic contractions of isolated organs and tissue, and measuring small displacements in physiological preparations.
Overview
These isotonic transducers are suitable for investigating isotonic contractions of isolated organs and tissue, and measuring small displacements in physiological preparations.
Configurations
Hall Effect Isotonic Transducer copy permalink
https://www.adinstruments.com/products/isotonic-transducers#product-MLT7006
MLT7006
A low inertia, high-performance isotonic transducer suitable for investigating isotonic contractions in isolated organs and tissue. Attachement of this transducer requires a certain distance from the lab stand rod, thus making our range of Radnoti Organ Baths ideal when purchased with specialised extended chamber and tissue support holders. Please contact your ADInstruments Representative for more information.
The Hall Effect Isotonic Transducer features:
- a finely adjustable counterweight
- accurate measurement of displacements with preadjusted loads of as small as 100 - 200 mg
- an operating range of ± 15º
- a voltage output of 300µV per mm displacement of the lever arm tip.
It directly connects to any ADInstruments Bridge Amp, Quad Bridge Amp or Octal Bridge Amp. Discontinued ML110, ML112, ML221, ML224 and ML228 Bridge Amps are also compatible.
High Grade Isotonic Transducer copy permalink
https://www.adinstruments.com/products/isotonic-transducers#product-MLT0015
MLT0015
The High Grade Isotonic Transducer is a high performance isotonic transducer, suitable for the measurement of displacements with preadjusted loads in the range of ±15°.
Recommended for use with our range of Research or Teaching Tissue/Organ Bath models and is suitable for connection to the Bridge Amp, Quad Bridge Amp and Octal Bridge Amp. It also operates with the discontinued ML110 and ML112 Bridge Amps.
Please note: it does not operate with the discontinued ML118 Quad Bridge Amp or ML119 Octal Bridge Amp.
Semi-Isotonic Transducer copy permalink
https://www.adinstruments.com/products/isotonic-transducers#product-MLT1040
MLT1040
The Semi-Isotonic Transducer is a cantilever beam device capable of measuring small movements in physiological preparations with a range of 10-100 mm. The Nickel-plated steel lever can be placed in any position, offering great flexibility. It features high linearity and nearly isotonic characteristics.
This transducer is supplied with an 8-pin DIN connector and can be used with any ADInstruments Bridge Amp.
This product is not currently available for purchase in the EU.
Hall Effect Isotonic Transducer
MLT7006
High Grade Isotonic Transducer
MLT0015
High Grade Isotonic Transducer
MLT0015
Support
Support Articles
Our Support Articles contain answers to common questions, how-tos, solutions, and documentation.
Training and Workshops
Maximize time and resources with our customized training services delivered at your facility, on your equipment, on your terms.
See Training & Workshops
