×

Get a quote

Thank you for your interest in Microelectrode Millivolt and O2 Adapters. Please complete and submit the form below and an ADInstruments representative will aim to get in touch within one working day. If you’d like to speak to someone immediately, office contact information is available from the contact page.

×

Ask a question

Thank you for your interest in Microelectrode Millivolt and O2 Adapters. Please complete and submit the form below and an ADInstruments representative will aim to get in touch within one working day. If you’d like to speak to someone immediately, office contact information is available from the contact page.

×

Request a demo

Thank you for your interest in Microelectrode Millivolt and O2 Adapters. Please complete and submit the form below and an ADInstruments representative will aim to get in touch within one working day. If you’d like to speak to someone immediately, office contact information is available from the contact page.

×
×
checkmark Item successfully added to your quote request.

Microelectrode Millivolt and O2 Adapters

MV-ADPT-BNC, MV-ADPT-DIN, O2-ADPT-BNC, O2-ADPT-DIN, O2-ADPT100-BNC, O2-ADPT100-DIN

Configurations


Millivolt Adapter (BNC)

MV-ADPT-BNC

An analog adapter with a supplied interconnecting BNC cable that connects directly to PowerLab BNC input. It is required for use with compatible pH or ion selective microelectrodes for a single corresponding pH or ion selective measurement.


Millivolt Adapter (DIN)

MV-ADPT-DIN

An analog adapter with a supplied interconnecting DIN cable that connects directly to PowerLab DIN input. It is required for use with compatible pH or ion selective microelectrodes for a single corresponding pH or ion selective measurement. DIN isolation allows multiple adapters of this version to be simultaneously used with PowerLab for recording multiple simultaneous measurements.


O2 Adapter (100, BNC)

O2-ADPT100-BNC

An analog adapter for use with compatible oxygen microelectrodes for a single measurement of dissolved oxygen (O2) in solutions. It is recommended for use when the solutions are 95% to 100% O2 saturation, such as when solutions are gassed at 37 º Celsius in tissue-organ bath and Langendorff studies. It is a supplied interconnecting BNC cable that connects directly to PowerLab BNC input.


O2 Adapter (100, DIN)

O2-ADPT100-DIN

An analog adapter for use with compatible oxygen microelectrodes for a single measurement of dissolved oxygen (O2) in solutions. It is recommended for use when the solutions are 95% to 100% O2 saturation, such as when they are gassed at 37 º Celsius in tissue-organ bath and Langendorff studies. It is a supplied interconnecting DIN cable that connects directly to PowerLab DIN input. DIN isolation allows multiple adapters of this version to be simultaneously used with PowerLab for recording multiple simultaneous dissolved oxygen measurements.

 


O2 Adapter (BNC)

O2-ADPT-BNC

An analog adapter with a supplied interconnecting BNC cable that connects directly to PowerLab BNC input. It is required for use with compatible oxygen microelectrodes for a single measurement of dissolved oxygen in solutions.


O2 Adapter (DIN)

O2-ADPT-DIN

An analog adapter with a supplied interconnecting DIN cable that connects directly to PowerLab DIN input. It is required for use with compatible oxygen microelectrodes for a single measurement of dissolved oxygen in solutions.DIN isolation allows multiple adapters of this version to be simultaneously used with PowerLab for recording multiple simultaneous dissolved oxygen measurements.


×

Microelectrode Millivolt and O2 Adapters

PRICE ON REQUEST

Adapters that connect corresponding pH, ion selective or oxygen microelectrodes directly to a PowerLab BNC or DIN input.

Book a Demo

Overview

A range of analog adapters that connect corresponding pH, ion selective or oxygen microelectrodes directly to a PowerLab BNC or DIN input depending on the version of the supplied interconnecting cable.  BNC versions of the adapters are designed without isolation for a single measurement setup, while DIN versions can be used for simultaneous multiple measurements setups. Required calibrations can be performed manually or via a computer.

Configurations


Millivolt Adapter (BNC)

MV-ADPT-BNC

An analog adapter with a supplied interconnecting BNC cable that connects directly to PowerLab BNC input. It is required for use with compatible pH or ion selective microelectrodes for a single corresponding pH or ion selective measurement.

Millivolt Adapter (DIN)

MV-ADPT-DIN

An analog adapter with a supplied interconnecting DIN cable that connects directly to PowerLab DIN input. It is required for use with compatible pH or ion selective microelectrodes for a single corresponding pH or ion selective measurement. DIN isolation allows multiple adapters of this version to be simultaneously used with PowerLab for recording multiple simultaneous measurements.

O2 Adapter (100, BNC)

O2-ADPT100-BNC

An analog adapter for use with compatible oxygen microelectrodes for a single measurement of dissolved oxygen (O2) in solutions. It is recommended for use when the solutions are 95% to 100% O2 saturation, such as when solutions are gassed at 37 º Celsius in tissue-organ bath and Langendorff studies. It is a supplied interconnecting BNC cable that connects directly to PowerLab BNC input.

O2 Adapter (100, DIN)

O2-ADPT100-DIN

An analog adapter for use with compatible oxygen microelectrodes for a single measurement of dissolved oxygen (O2) in solutions. It is recommended for use when the solutions are 95% to 100% O2 saturation, such as when they are gassed at 37 º Celsius in tissue-organ bath and Langendorff studies. It is a supplied interconnecting DIN cable that connects directly to PowerLab DIN input. DIN isolation allows multiple adapters of this version to be simultaneously used with PowerLab for recording multiple simultaneous dissolved oxygen measurements.

 

O2 Adapter (BNC)

O2-ADPT-BNC

An analog adapter with a supplied interconnecting BNC cable that connects directly to PowerLab BNC input. It is required for use with compatible oxygen microelectrodes for a single measurement of dissolved oxygen in solutions.

O2 Adapter (DIN)

O2-ADPT-DIN

An analog adapter with a supplied interconnecting DIN cable that connects directly to PowerLab DIN input. It is required for use with compatible oxygen microelectrodes for a single measurement of dissolved oxygen in solutions.DIN isolation allows multiple adapters of this version to be simultaneously used with PowerLab for recording multiple simultaneous dissolved oxygen measurements.

×
checkmark Item successfully added to your quote request.
Millivolt Adapter (BNC)

Millivolt Adapter (BNC)

MV-ADPT-BNC

×
checkmark Item successfully added to your quote request.
Millivolt Adapter (DIN)

Millivolt Adapter (DIN)

MV-ADPT-DIN

×
checkmark Item successfully added to your quote request.
O2 Adapter (100, BNC)

O2 Adapter (100, BNC)

O2-ADPT100-BNC

×
checkmark Item successfully added to your quote request.
O2 Adapter (100, DIN)

O2 Adapter (100, DIN)

O2-ADPT100-DIN

×
checkmark Item successfully added to your quote request.
O2 Adapter (BNC)

O2 Adapter (BNC)

O2-ADPT-BNC

×
checkmark Item successfully added to your quote request.
O2 Adapter (DIN)

O2 Adapter (DIN)

O2-ADPT-DIN

Support

Support Articles

Our Support Articles contain answers to common questions, how-tos, solutions, and documentation.

Training and Workshops

Maximize time and resources with our customized training services delivered at your facility, on your equipment, on your terms.

See Training & Workshops

Details and Tech Specs

Technical

Millivolt Adaptor Specifications: 

  • Output = 1mV/mV Input
  • Size = 28.5 mm x 22.4 mm x 58 mm
  • Battery = 3V lithium CR2032 (~5 yrs battery life)
  • Weight = 70 g
  • Connectors: 00.250 Lemo  
     

Product Codes


MV-ADPT-BNC
Millivolt Adapter (BNC)
MV-ADPT-DIN
Millivolt Adapter (DIN)
O2-ADPT100-BNC
O2 Adapter (100, BNC)
O2-ADPT100-DIN
O2 Adapter (100, DIN)
O2-ADPT-BNC
O2 Adapter (BNC)
O2-ADPT-DIN
O2 Adapter (DIN)
Ask a question×