×

Get a quote

Thank you for your interest in Teaching Force Transducers. Please complete and submit the form below and an ADInstruments representative will aim to get in touch within one working day. If you’d like to speak to someone immediately, office contact information is available from the contact page.

×

Ask a question

Thank you for your interest in Teaching Force Transducers. Please complete and submit the form below and an ADInstruments representative will aim to get in touch within one working day. If you’d like to speak to someone immediately, office contact information is available from the contact page.

×

Request a demo

Thank you for your interest in Teaching Force Transducers. Please complete and submit the form below and an ADInstruments representative will aim to get in touch within one working day. If you’d like to speak to someone immediately, office contact information is available from the contact page.

×
×
checkmark Item successfully added to your quote request.

Teaching Force Transducers

MLTF050/ST, MLTF500/ST, MLT0210/A, MLT0210/D

Configurations


Status message

Please select which product configuration you would like to add to your cart.

Teaching Force Transducer (0-50 g)

MLTF050/ST

$665.00 USD

Can be used to measure isometric forces from 0 to 50 g. Connects directly to a Pod input (8-pin DIN) of PowerLab or Pod expander.

checkmarkShips from USA
Estimated delivery time: 2-5 business days.


Teaching Force Transducer (0-500 g)

MLTF500/ST

$665.00 USD

Can be used to measure isometric forces from 0 to 500 g. Connects directly to a Pod input (8-pin DIN) of PowerLab or Pod expander.

checkmarkShips from USA
Estimated delivery time: 2-5 business days.


Teaching Force Transducer for Bridge Amp

MLT0210/D

$612.00 USD

Isometric force transducer designed for use with a Single Chamber Organ Bath. It operates in the range of 10 mg to 25 g with a resolution of 5 mg. Suitable for connection to any ADInstruments Bridge Amp.

hourglassShips from Overseas
Estimated delivery time: 1 month.


Teaching Force Transducer for Bridge Pod

MLT0210/A

$666.00 USD

Isometric force transducer designed for use with Single Chamber Organ Bath. It operates in the range of 10 mg to 25 g with a resolution of ±5 mg. Suitable for connection to a Bridge Pod.

hourglassShips from Overseas
Estimated delivery time: 1 month.


×

Configurations


Teaching Force Transducer (0-50 g)

MLTF050/ST

Can be used to measure isometric forces from 0 to 50 g. Connects directly to a Pod input (8-pin DIN) of PowerLab or Pod expander.


Teaching Force Transducer (0-500 g)

MLTF500/ST

Can be used to measure isometric forces from 0 to 500 g. Connects directly to a Pod input (8-pin DIN) of PowerLab or Pod expander.


Teaching Force Transducer for Bridge Amp

MLT0210/D

Isometric force transducer designed for use with a Single Chamber Organ Bath. It operates in the range of 10 mg to 25 g with a resolution of 5 mg. Suitable for connection to any ADInstruments Bridge Amp.


Teaching Force Transducer for Bridge Pod

MLT0210/A

Isometric force transducer designed for use with Single Chamber Organ Bath. It operates in the range of 10 mg to 25 g with a resolution of ±5 mg. Suitable for connection to a Bridge Pod.


×

Teaching Force Transducers

$612.00 USD-$666.00 USD

Low-cost, strain force gauge based force transducers, suitable for measuring muscle contractions or similar forces such as in isolated tissue-organ bath experiments in teaching applications.

Book a Demo

Overview

Low-cost, strain gauge based force transducers, suitable for measuring muscle contractions or similar forces such as in isolated tissue-organ bath experiments in teaching applications. Transducers operate such that when force is applied to the transducer, it causes the strain-gauge elements to change resistance, and hence produce a change in signal voltage. The support rod can be easily switched around to suit mounting on different micropositioners and manipulators. Products available for connection via either a Pod-input on a PowerLab, Bridge Pod or Bridge Amp.

Configurations


Teaching Force Transducer (0-50 g)

MLTF050/ST

Can be used to measure isometric forces from 0 to 50 g. Connects directly to a Pod input (8-pin DIN) of PowerLab or Pod expander.

Teaching Force Transducer (0-500 g)

MLTF500/ST

Can be used to measure isometric forces from 0 to 500 g. Connects directly to a Pod input (8-pin DIN) of PowerLab or Pod expander.

Teaching Force Transducer for Bridge Amp

MLT0210/D

Isometric force transducer designed for use with a Single Chamber Organ Bath. It operates in the range of 10 mg to 25 g with a resolution of 5 mg. Suitable for connection to any ADInstruments Bridge Amp.

Teaching Force Transducer for Bridge Pod

MLT0210/A

Isometric force transducer designed for use with Single Chamber Organ Bath. It operates in the range of 10 mg to 25 g with a resolution of ±5 mg. Suitable for connection to a Bridge Pod.

×
checkmark Item successfully added to your quote request.
Teaching Force Transducer (0-50 g)

Teaching Force Transducer (0-50 g)

MLTF050/ST

×
checkmark Item successfully added to your quote request.
Teaching Force Transducer (0-500 g)

Teaching Force Transducer (0-500 g)

MLTF500/ST

×
checkmark Item successfully added to your quote request.
Teaching Force Transducer for Bridge Amp

Teaching Force Transducer for Bridge Amp

MLT0210/D

×
checkmark Item successfully added to your quote request.
Teaching Force Transducer for Bridge Pod

Teaching Force Transducer for Bridge Pod

MLT0210/A

Support

Support Articles

Our Support Articles contain answers to common questions, how-tos, solutions, and documentation.

Training and Workshops

Maximize time and resources with our customized training services delivered at your facility, on your equipment, on your terms.

See Training & Workshops

Details and Tech Specs

Product Codes


MLTF050/ST
Teaching Force Transducer (0-50 g)
MLTF500/ST
Teaching Force Transducer (0-500 g)
MLT0210/D
Teaching Force Transducer for Bridge Amp
MLT0210/A
Teaching Force Transducer for Bridge Pod
Ask a question×