Can I autoclave my T-type temperature probe?

Yes. It is possible to sterilize the t-type temperature probes.  The following cleaning instructions are valid for these transducers:

Cleaning before sterilization: Wipe with alcohol or cleaning solution


Note: The plug should never be immersed in liquid. It is sealed with epoxy to prevent moisture entering during normal use and wiping, but has not been tested for immersion.


AUTOCLAVING:

Sterilize at: 134°C for 3 minutes at 2.2 bar

or 121°C for 15 minutes
or 115°C for 30 minutes