How do I detect “Peak Frequency” when performing HRV analysis?

In HRV, the peak frequency for each band can be found by placing the cursor over the peak of interest in the HRV Power Spectrum Plot. For example, the attached image shows the cursor placed on the peak of the LF band and the text at the top of the View indicates that this peak is at 0.092Hz. This process can be repeated for each band.
5B8I6tlo79LiNwlcGZ0TJmhvpT3-eZjSEeF2SBu4Do2zhgKmq2LtmGVnfgSO2U015RPsF9rB4g1oUe95Fkood-rjavwK299OK06cp5z04Yh1rZu0JTX0_wjznpIylyQeU9U6UrXk

If you have further questions or concerns about this topic, please contact your local Technical Support Representative by completing the online form located HERE.