What if the serial number of an implanted telemeter is unknown, lost or forgotten?

It is always recommended to write down the telemeter serial number and channel at the time of surgery. However, the "Search for Telemeter" in ConfigSoft can be used with a process of elimination. The Configurator will search through each of the 16 channels and report any telemeters active and within range. If there is more than one unknown telemeter, move any other telemeters out of the detection area (more than 5m away) and perform the test on each telemeter separately. 

For further technical assistance with this or any other issue, please contact ADInstruments Technical Support by clicking HERE.