Safely record everything from a simple 3 lead ECG up to a full 12 lead ECG using our system.
Electrocardiography (ECG or EKG) studies the heart's electrical activity, usually recorded by electrodes on the skin. ECG signals are recorded to examine heart rate, heart rate variability, analysis of the waveform morphology, and other similar functions.
We offer a range of Bio Amps for recording ECG signals that are tested and certified for use in human subjects.
Our Bio Amps interface seamlessly with PowerLab and LabChart forming a streamlined ECG acquisition and analysis system.
Human Certified
Bio Amps
All-in-one acquisition and analysis system
Record multiple signals at one time
High quality signal recording
Specialized tools
for analysis
In conjunction with our solutions below, any device with an analog output (+/- 10V) can be connected to a PowerLab data acquisition system for synchronization in LabChart, giving you more flexibility and the ability to integrate all your data streams in one place.
All of our hardware recommended for human use is backed by the appropriate safety certification standards. More information on safety standards.
The Equivital Starter Pack (Single) is perfect if you are currently planning to record data from one individual as it comes with only one of Equivital’s compact and unobtrusive wearable ECG sensor...
RSB-EQ002-1,RSB-EQ002-2,RSB-EQ002-3,RSB-EQ002-4,RSB-EQ002-5,RSB-EQ002-6,RSB-EQ002-7,RSB-EQ002-8,RSB-EQ002-9
Click the Quote Request icon to add
a product to your Quote Request
The Bio Amp is a galvanically isolated, high-performance differential bio amplifier optimized for the measurement of a wide variety of biological signals including ECG, EMG and EEG recordings.
The Dual Bio Amp consists of two galvanically isolated, high-performance differential amplifiers optimized for the measurement of a wide variety of biological signals such as ECG (EKG), EMG, EOG,...
Disposable ECG electrodes for use with snap-connect lead wires. Our suction electrodes can be used for ECG or other biopotential measurements. Packs of 100 or 1000 ECG electrodes available.
Biopotential Electrodes and Lead Wires
A range of electrodes and lead wires are available for connection to ADInstruments Bio Amps.
Shielded or unshielded? If electrical interference in your signal is a problem, you may benefit from using shielded subject cables and lead wires. Single and Dual Bio Amps support both shielded and unshielded lead wires while the Quad and Octal only support unshielded.
MLA0313, MLA0315, MLA0310, MLA0311, MLA1505, MLA4103, MLA4105, MLA8203, MLA8205, MLA2510, MLA1615, MLA1605, MLA1610, MLA2505, MLA2504, MLA2503
The ECG 12 Lead Switch Box allows for the mechanical selection of standard lead configurations using 10 standard lead wires.
The Switch Box is available in two configurations:
ECG 12 Lead Switch Box (Dual Bio Amps)
For use with the Bio Amp, or any PowerLab with a built-in dual bio amp (PowerLab 26T, PowerLab 15T).
ECG 12 Lead Switch Box (Single Bio Amp)
For use with the single channel Bio Amp, or the discontinued Metabolic System.
Equivital SEM External Battery Pack
The Equivital SEM External Battery Pack increases the battery life of the SEM to 24-43 hours (depending on configuration used).
The Equivital M-Dock is a desktop dock that allows for charging/configuration of up to 6 Equivital SEMs.
Measure a wide range of physiological signals with an 8- or 16-channel PowerLab. Connect directly to the Blood Pressure Amp as well as a range of other conditioners, instruments and transducers.
Creates a platform allowing you to acquire biological signals from multiple sources simultaneously and apply advanced calculations and plots.
Data acquisition and analysis re-imagined. Make unique discoveries with unlimited freedom and flexibility.
Arrhythmia
Cardiovascular disease and myocardial dysfunction
Pharmacological impact on heart health
Safely record everything from a simple 3 lead ECG up to a full 12 lead ECG using our system.
ADInstruments systems provide an integrated solution to advance life science research. With the combination of LabChart or LabChart Lightning analysis software and a PowerLab data acquisition unit, you have the flexibility to collect and synchronize a wide range of signals for analysis. We also offer a range of LabChart compatible solutions able to stream directly in LabChart.
Enabling Discovery
LabChart data analysis software creates a platform for all of your recording devices to work together, allowing you to acquire biological signals from multiple sources simultaneously and apply advanced calculations and plots as your experiment unfolds.
Data acquisition and analysis re-imagined. Make unique discoveries with unlimited freedom and flexibility. Try LabChart Lightning »
Data with Integrity
High-performance data acquisition hardware designed for life science research. PowerLab is engineered for precise, consistent, reliable data acquisition, giving you the reproducible data you need while meeting the strictest international safety standards.
LabChart software is designed specifically for life science data and provides up to 32 channels for data display and analysis options that are powerful and easy to use. With auto-recognition of ADI and LabChart Compatible hardware, multi-window views, one touch recording, simultaneous recording from multiple devices, specialized preconfigured settings, easy sharing options and an interface that can be customized to show only the features you want to use.
Analysing an ECG signal using LabChart’s ECG Analysis Module
To reduce noise in your ECG recording, avoid placing electrodes over large muscle groups e.g. Biceps, where possible.
ADInstruments Bio Amps also provide flexible settings (range, filters) which allow you to detect small changes in ECG that may not be detected in clinical ECG machines. The same Bio Amp can then also be used to record other biopotentials such as EEG, EMG and EOG.
×Additional acquisition and analysis options to support your ECG analysis:
The ECG Analysis Module for LabChart automatically detects and reports PQRST onset, amplitude and intervals in real time, or after recording.
ECG Analysis
MLS360/8
The Heart Rate Variability (HRV) Module for LabChart analyzes beat-to-beat interval variation in ECG recordings or arterial pulse signals.
HRV
MLS310/8
Pre-process incoming signals to detect cycles and analyze waveforms in real-time.
Cyclic Measurements
Relative measurements are made easily from the displayed data using the Waveform Cursor and the Marker.
Waveform Cursor
Within the Zoom Window you can expand and examine a small section of LabChart ECG data in detail.
Zoom Window
Data Collection & Analysis in Human Autonomic Research: How to Guide Successful Testing
In this webinar, Jackie Limberg, PhD discusses the basics of human autonomic research as well as...
Equivital Wireless Physiological Monitoring
Thank you for your interest in Electrocardiography (ECG/EKG). Please complete and submit the form below and an ADInstruments representative will aim to get in touch within one working day. If you’d like to speak to someone immediately, office contact information is available from the contact page.
×Thank you for your interest in Electrocardiography (ECG/EKG). Please complete and submit the form below and an ADInstruments representative will aim to get in touch within one working day. If you’d like to speak to someone immediately, office contact information is available from the contact page.
×
Ask a question×
