×

Get a quote

Thank you for your interest in Trigno EMG Sensors. Please complete and submit the form below and an ADInstruments representative will aim to get in touch within one working day. If you’d like to speak to someone immediately, office contact information is available from the contact page.

×

Ask a question

Thank you for your interest in Trigno EMG Sensors. Please complete and submit the form below and an ADInstruments representative will aim to get in touch within one working day. If you’d like to speak to someone immediately, office contact information is available from the contact page.

×

Request a demo

Thank you for your interest in Trigno EMG Sensors. Please complete and submit the form below and an ADInstruments representative will aim to get in touch within one working day. If you’d like to speak to someone immediately, office contact information is available from the contact page.

×
×
checkmark Item successfully added to your quote request.

Trigno EMG Sensors

DSY-SP-W06-14, DSY-SP-W01J, DSY-SP-W01C

Configurations


Trigno Avanti EMG + IMU Sensor

DSY-SP-W06-14

Provides wireless and flexible measurement of a high fidelity surface EMG signal, with a wide bandwidth 10-850 Hz and  11mV range. Also provides motion detection signals through an onboard IMU  (3D Accelerometry, 3D Gyroscope, and 3D Magnetometer).  Compatible for use with the Trigno Wireless Foundation System, this lightweight and compact sensor is a multi-purpose human movement sensor for either the lab or the classroom. 


Trigno Quattro

DSY-SP-W06-016

The Trigno Avanti Quattro Sensor allows wireless measurement of 4 high fidelity surface EMG signals. It consists of 4 small sensor heads connected via short leads to the main sensor body. A 9 Axis IM sensor is also built into the unit. The sensor is designed to work with the Trigno Base Station (Lab or Digital), which is purchased separately. It can also be used with the Delsys Avanti Android App via a Bluetooth connection. It weighs 25 g, the main body measures 27 x 46 x 13 mm and each of the 4 heads measure 25 x 12 x 7 mm). Note that this is a 4 'slot' sensor which means it counts as 4 sensors towards the 16 sensor limit on each Trigno Base Station.


Trigno Mini Sensor

DSY-SP-W06-024

Provides wireless measurement of a high fidelity surface EMG signal in small and difficult-to-isolate muscles, which is achieved with a small sensing head (25 mm x 12 mm x 7 mm and weighs 2.1 g). It is designed for use with the Trigno Wireless Foundation System. Each sensor has a built-in IMU.


Trigno Snap-Lead Sensor

DSY-SP-W06-018A

Provides wireless measurement of a high fidelity surface EMG signal using clamp style connector leads with Trigno Wireless Foundation System. Each sensor has a built-in IMU. Available with with 4" or 12" Leads.


×

Trigno EMG Sensors

Delsys Trigno Wireless EMG Sensors

PRICE ON REQUEST

Range of Trigno EMG sensors from Delsys that are used to measure and wirelessly transmit  (≤ 40 m) surface EMG (sEMG) signals to the Trigno Wireless Foundation System and then analyzed in real-time using LabChart software and a Trigno Wireless device enabler.

Book a Demo

Overview

 

 

The Trigno EMG sensors from Delsys are used to measure and wirelessly transmit  (≤ 40 m) surface EMG (sEMG) signals to the  Trigno Wireless Foundation System and then analyzed in real-time using LabChart software and a Trigno Wireless device enabler.

Some Delsys EMG sensors also feature a 3 axis accelerometer that can be used for motion studies. All sensors are light weight with signals streamed (≤ 40 m) to the Trigno Base Station (receiver) for freedom of movement.

Sensors are purchased separately to the Wireless Foundation System where the number of sensors is limited to 16 per Trigno Base Station. As a guide, Delsys recommends to include 4, 8 and 16 sensors when appropriate.

Other Trigno sensors are also available:

Accessories: (purchase separately)

Configurations


Trigno Avanti EMG + IMU Sensor

DSY-SP-W06-14

Provides wireless and flexible measurement of a high fidelity surface EMG signal, with a wide bandwidth 10-850 Hz and  11mV range. Also provides motion detection signals through an onboard IMU  (3D Accelerometry, 3D Gyroscope, and 3D Magnetometer).  Compatible for use with the Trigno Wireless Foundation System, this lightweight and compact sensor is a multi-purpose human movement sensor for either the lab or the classroom. 

Trigno Quattro

DSY-SP-W06-016

The Trigno Avanti Quattro Sensor allows wireless measurement of 4 high fidelity surface EMG signals. It consists of 4 small sensor heads connected via short leads to the main sensor body. A 9 Axis IM sensor is also built into the unit. The sensor is designed to work with the Trigno Base Station (Lab or Digital), which is purchased separately. It can also be used with the Delsys Avanti Android App via a Bluetooth connection. It weighs 25 g, the main body measures 27 x 46 x 13 mm and each of the 4 heads measure 25 x 12 x 7 mm). Note that this is a 4 'slot' sensor which means it counts as 4 sensors towards the 16 sensor limit on each Trigno Base Station.

Trigno Mini Sensor

DSY-SP-W06-024

Provides wireless measurement of a high fidelity surface EMG signal in small and difficult-to-isolate muscles, which is achieved with a small sensing head (25 mm x 12 mm x 7 mm and weighs 2.1 g). It is designed for use with the Trigno Wireless Foundation System. Each sensor has a built-in IMU.

Trigno Snap-Lead Sensor

DSY-SP-W06-018A

Provides wireless measurement of a high fidelity surface EMG signal using clamp style connector leads with Trigno Wireless Foundation System. Each sensor has a built-in IMU. Available with with 4" or 12" Leads.

×
checkmark Item successfully added to your quote request.
Trigno Avanti EMG + IMU Sensor

Trigno Avanti EMG + IMU Sensor

DSY-SP-W06-14

×
checkmark Item successfully added to your quote request.
Trigno Quattro

Trigno Quattro

DSY-SP-W06-016

×
checkmark Item successfully added to your quote request.
Trigno Mini Sensor

Trigno Mini Sensor

DSY-SP-W06-024

×
checkmark Item successfully added to your quote request.
Trigno Snap-Lead Sensor

Trigno Snap-Lead Sensor

DSY-SP-W06-018A

Related

Research Applications

Features

  • Provides freedom of movement.
  • Built in 9-axis inertial measurement unit (IMU) in the Avanti Sensor.
  • Patented Parallel-Bar technology guarantees high fidelity signals.
  • Patent Pending Motion Artifact Suppression.
  • Guaranteed performance to 40 m (20 m for mini sensors).
  • Small and lightweight sensors.
  • Long transmission mode operation (6 to 8 hours with 2 to 2.5 hours recharge time).
  • High 16-bit resolution and 2000 Hz sampling rate.
  • <500 µs inter-sensor latency.
  • Real-time feedback of signal strength & battery status.
  • Low noise operation.
  • Full EMG bandwidth capture ability, flexible bandwidth and input options in the Avanti sensor.

Support

Support Articles

Our Support Articles contain answers to common questions, how-tos, solutions, and documentation.

Training and Workshops

Maximize time and resources with our customized training services delivered at your facility, on your equipment, on your terms.

See Training & Workshops

Details and Tech Specs

Product Codes


DSY-SP-W06-14
Trigno Avanti EMG + IMU Sensor
DSY-SP-W06-016
Trigno Quattro
DSY-SP-W06-024
Trigno Mini Sensor
DSY-SP-W06-018A
Trigno Snap-Lead Sensor

Technical

General Specifications


 
Avanti Sensor - EMG + IMU Mini EMG + XYZ Sensor Snap-Lead EMG + XYZ Sensor
Typical Operating Range 20 m (RF) 20 m 20 m
Case Dimension 27 x 37 x 13 mm 25 x 12 x 7 mm (mini head) 27 x 37 x 15 mm (main sensor) 27 x 37 x 15 mm
Inter Sensory Latency <1 sampling period <1 sampling period <1 sampling period
Full-charge Operation Time >6 hours (typical) >6 hours (typical) >6 hours (typical)
Recharge Time 2.5 hours 2.5 hours 2.5 hours
Head Cable Length N/A 125 mm 125 mm
Mass 14 g 14.7g (main sensor), 2.1g (mini head) 14.7 g

EMG Specifications


 
Avanti Sensor - EMG + IMU Mini EMG + XYZ Sensor Snap-Lead EMG + XYZ Sensor
Range 11 mV 11 mV 11 mV
Bandwidth (EMG signal) High Pass: 10 Hz

Low Pass: 850 Hz
High Pass: 20 ± 5 Hz > 40 dB/dec

Low Pass: 450 ± 50 Hz, >80 dB/dec
 
Overall Channel Noise

<3 uV RMS @ 10-850 Hz

< 0.75 µV (RMS) <0.75 µV
CMRR >80 dB >80 dB >80 dB
Sampling Rate 1111 Hz (1000 Hz Bluetooth - not compatible with LabChart recording) 1926 Hz 1926 Hz
Number of Contacts 4 2 4
Contact Dimensions 5 mm x 1 mm 5 mm x 1 mm n/a
Contact Material 99.9 % Silver 99.9 % Silver 99.9 % Silver
EMG Channel Resolution Depth 16 bits 16 bits 16 bits

Accelerometer Specifications

  Avanti Sensor - EMG + IMU Mini EMG + XYZ Sensor Snap-Lead EMG + XYZ Sensor
Number of Axis 3 DOF 3 DOF 3 DOF
Range ± 16 g ± 1.5 g ± 6 g ± 1.5 g ± 6 g
Sampling Resolution 0.016 ± 0.001 g/bit (at ± 1.5 g) 0.063 ± 0.005 g/bit (at ± 6g) 20 ± 5 Hz, > 40 dB/dec 450 ± 50 Hz, > 80 dB/dec 20 ± 5 Hz > 40 dB/dec 450 ± 50 Hz > 80 dB/dec
Accelerometer Noise <0.01 g (AC RMS) 0.004 g (rms, ± 1.5 g) 0.016 g (rms, ± 6 g) 0.016 g (rms, ± 1.5 g) 0.032 g (rms , ± 6 g)
Bandwidth DC – 50 ± 5 Hz, 20 dB/dec DC – 50 ± 5 Hz, 20 dB/dec DC – 50 ± 5 Hz, 20 dB/dec
Offset Error ± 0.25 g ± 0.21 g (XY) ± 0.21 g / -0.42 g (Z) ± 0.21 g (XY) ± 0.21 g / -0.42 g (Z)
Sampling Rate 148 samples/second/axis 148 samples/second/axis 148 samples/second
Accelerometer Resolution Depth 16 bits 10 bits 10 bits

Gyroscope Specifications

  Avanti Sensor - EMG + IMU
Signal Range  ± 2000 º/s
Sampling Rate 148 samples/second/axis

Magnetometer Specifications

  Avanti Sensor - EMG + IMU
Signal Range ± 1000 µT
Sampling Period 148 samples/second/axis

Related

Research Applications

Ask a question×