A wide range of PowerLab DAQ accessories and parts are available, including catheters, safety connectors, cables, heating coils, ECG wires and more.
Filter by product type
Response Pad to PowerLab Cable (2m)
The Response Pad to PowerLab Cable (2m) connects to the Accessory Connector on the back of the any of the RB-x30 Series (discontinued) response pads directly to any PowerLab unit with a Digital Input.
Response Pads
These response pads are smart devices and are ideally suited for SuperLab experiments involving spatial orientation.
Reusable ECG Electrodes
The ECG clamp electrodes pack contains three reusable clamp electrodes which can be attached to wrists or ankles.
Reusable Mouthpieces (10 pk)
The vinyl mouthpieces (10 pk) are used with Disposable Filters and ideal for use in the respiratory classroom.
Rho Calibration Cuvette
The Rho Calibration Cuvette is used to calibrate Pressure-Volume catheters using the MPVS Ultra Pressure-Volume unit from Millar (for large & small animals).
Rodent NIBP CODA® Accessories
The Rodent NIBP CODA® Accessories are designed for use with the ADInstruments CODA® Monitor for measuring non-invasive blood pressure in rodents.
Rodent NIBP CODA® Occlusions Cuffs
Occlusion cuffs designed for use with the ADInstruments CODA® Monitor for recording non-invasive blood pressure in rodents.
Rodent NIBP CODA® VPR Cuff Sensors
Cuff Sensors are designed for use with the ADInstruments CODA® Monitor for recording non-invasive blood pressure from rodents.
Rodent Tail Cuff Holder
For use with Panlab rodent restrainers to hold the non-invasive blood pressure (NIBP) transducer and tail cuff by Panlab (no longer distributed by ADInstruments).

Shrouded Connectors (10 red, 10 black)
A pack of ten pairs of shrouded connectors (Red & Black) for use in connecting electrodes to the GSR Amp, ADInstruments Stimulators and PowerLab 4/26T.
Snap Holder and Bracket for Pressure Transducer
Allows the Physiological Pressure Transducer to be mounted or clamped onto a stand.
Spirometer Kit
The Spirometer Kit provides a number of disposable items suitable for use in general classroom respiratory measurements.
Spring Clip Electrodes
The Spring Clip Electrodes are ideal for measuring electrical activity from the isolated heart in a Langendorff or Working Heart preparation.
Stand Base Spill Tray
The ADInstruments Langendorff Stand Base Spill Tray is a sturdy tray that drains away spills and other fluid messes, compatible with Langendorff and Radnoti Stand Bases for 2-3 support rods.
STH Pump Controller to Peristaltic Pump Cable II
Connects the STH Pump Controller to the input Minipuls 3 Peristaltic Pump to maintain constant pressure in a compatible Langendorff apparatus.
StimTracker Duo
The StimTracker Duo allows for easy sending of event markers from a stimulus presentation computer to a PowerLab data acquisiti
StimTracker Quad
The StimTracker Quad allows for easy sending of event markers from a stimulus presentation computer to a PowerLab data acquisit
Stimulating Bar Electrode
Suitable for nerve or muscle stimulation, for connection to any PowerLab with built-in isolated stimulators or the Isolated Stimulator.
Stimulator Cables
Stimulator cables are suitable for connection to isolated stimulator outputs on T-series PowerLabs or outputs on ADInstruments Stimulators. Used in applications for Nerve Chambers and Isolated Heart preparations.
Stimulator HC Leads (2 m)
The Stimulator HC Leads (2 m) are designed for use with the Stimulator HC.
Stimulator Rod with Cable
The Stimulating rod is 150 mm long with an outer diameter of 10 mm.
T-type Thermocouple Probes
T-type Implantable Thermocouple Probes are suitable for connection to the T-type Pod or Cardiac Output Pod.
Thermistor Probe Extension Cable (Audio, 1.8 m)
A 1.8 m extension cable with 3-pin audio connectors, used in connecting the Thermistor Temperature Sensors to the Thermistor Pod.
Tri Shaped Tissue Supports
A pack of 12 tissue supports required for use with blood vessel ring preparations and L-shaped stimulating electrodes.