Wired Physiological Monitoring
Using wired (tethered) physiological monitoring you can collect precise movement data, record joint movement, and measure muscle activity with absolute confidence.
ADInstruments offer a wide range of wired solutions for studying the mechanics, properties, and performance of muscles and joints. Gain in-depth physiological insights into how the human body reacts to stress and stimulation by recording and analyzing signals including EMG, ECG, NIBP, temperature, SpO2, respiratory flow, fluid flow, angles, and ergometer output.
Get your subjects moving with PowerLab and our range of goniometers and specialized transducers which enable simultaneous stimulation and recording of movement from muscles and joints.
Record multiple
signals at one time
Complete
systems
Mix and match products
for a custom solution
Integrate with other
physiological recording options
In conjunction with our complete system shown below, any device (i.e. ergometer, exercise bike, treadmill) with an analog output (+/- 10V) can be connected to a PowerLab data acquisition system for synchronization of event in LabChart. So you have even more flexibility and can integrate all your data streams in one place.
All of our hardware recommended for human use is backed by the appropriate safety certification standards. More information on safety standards.
Related Components and Products
Creates a platform allowing you to acquire biological signals from multiple sources simultaneously and apply advanced calculations and plots.
Data acquisition and analysis re-imagined. Make unique discoveries with unlimited freedom and flexibility.
Engineered for precise, consistent, reliable data acquisition of a wide range of physiological signals. PowerLab gives you the reproducible data you need while meeting the strictest international standards.
Engineered for precise, consistent, reliable data acquisition of a wide range of physiological signals. PowerLab gives you the reproducible data you need while meeting the strictest international standards.
Millar offers two-channel amplifier/interface units to support either animal research or human pressure applications.
Millar offers two-channel amplifier/interface units to support either animal research or human pressure applications.
Our electronic goniometers are bipolar joint angle sensors for single degree of freedom joints, eg. the knee or elbow, used for a range of medical, anatomical & physiological applications.
Our electronic goniometers are bipolar joint angle sensors for single degree of freedom joints, eg. the knee or elbow, used for a range of medical, anatomical & physiological applications.
The MIllar Mikro-CathTM pressure catheter is a single-use solid-state catheter for use in regulated clinical pressure research.
The recording Bar Electrode has two 9 mm concave disk contacts spaced 30 mm apart. The leads from this electrode connect directly to Shielded Bio Amp Cables.
The recording Bar Electrode has two 9 mm concave disk contacts spaced 30 mm apart. The leads from this electrode connect directly to Shielded Bio Amp Cables.
The Respiratory Belt Transducer is designed to measure changes in chest diameter resulting from breathing. The belt produces a linear voltage proportional to changes in length and connects directly to a Pod (DIN) Port on a PowerLab. It is primarily designed for use on humans but can also be used on small and large animals.
Skin Temperature Probes are specifically designed for continuous temperature monitoring using the skin as an indicator of body temperature. They have a lead length of 2 meters and are designed to operate over the range 0 - 50°C, they are well suited to applications such as biomedical temperature monitoring requiring repeatability, high sensitivity and rapid response.
Skin Temperature Probes are specifically designed for continuous temperature monitoring using the skin as an indicator of body temperature. They have a lead length of 2 meters and are designed to operate over the range 0 - 50°C, they are well suited to applications such as biomedical temperature monitoring requiring repeatability, high sensitivity and rapid response.
The SpO2 Ear and Finger Clips are designed to measure oxygen saturation. They are approved for human use and supplied with the appropriate Oximeter Pod.
The SpO2 Ear and Finger Clips are designed to measure oxygen saturation. They are approved for human use and supplied with the appropriate Oximeter Pod.
Tendon Hammers available for connection via the BNC input channel or 8-pin Din (Pod) input channel of any PowerLab recording system, to provide triggering, timer or marker signals.
Tendon Hammers available for connection via the BNC input channel or 8-pin Din (Pod) input channel of any PowerLab recording system, to provide triggering, timer or marker signals.
Suitable for nerve or muscle stimulation, for connection to any PowerLab with built-in isolated stimulators or the Isolated Stimulator.
Suitable for nerve or muscle stimulation, for connection to any PowerLab with built-in isolated stimulators or the Isolated Stimulator.
The Stimulating rod is 150 mm long with an outer diameter of 10 mm. It has a rounded stainless steel tip that can be placed on the skin or tissue surface. The other end terminates in a stud connector. The rod is supplied with a cable 900 mm long that terminates in 4 mm shrouded connectors and a press stud connector to connect to the rod.
This Stimulator and Rod is suitable for use with any PowerLabs with built-in Isolated Stimulators (PowerLab 26T and PowerLab 15T) or Isolated Stimulator.
The Stimulating rod is 150 mm long with an outer diameter of 10 mm. It has a rounded stainless steel tip that can be placed on the skin or tissue surface. The other end terminates in a stud connector. The rod is supplied with a cable 900 mm long that terminates in 4 mm shrouded connectors and a press stud connector to connect to the rod.
This Stimulator and Rod is suitable for use with any PowerLabs with built-in Isolated Stimulators (PowerLab 26T and PowerLab 15T) or Isolated Stimulator.
Lab Builder – Find the right products for your research.
1Select your research area
2Use smart guide to tell us your needs
3Get instant product recommendations
Flexible Data Acquisition
ADInstruments systems provide an integrated solution to advance life science research. With the combination of LabChart or LabChart Lightning analysis software and a PowerLab data acquisition unit, you have the flexibility to collect and synchronize a wide range of signals for analysis. We also offer a range of LabChart compatible solutions able to stream directly in LabChart.
LabChart data analysis software creates a platform for all of your recording devices to work together, allowing you to acquire biological signals from multiple sources simultaneously and apply advanced calculations and plots as your experiment unfolds.
Data acquisition and analysis re-imagined. Make unique discoveries with unlimited freedom and flexibility.
High-performance data acquisition hardware designed for life science research. PowerLab is engineered for precise, consistent, reliable data acquisition, giving you the reproducible data you need while meeting the strictest international safety standards.
A modular data acquisition foundation system that provides unparalleled flexibility for researchers looking to invest in customizable, reliable solutions for both now, and in the future.
All your analysis in one place
LabChart software is designed specifically for life science data and provides up to 32 channels for data display and analysis options that are powerful and easy to use. With auto-recognition of ADI and LabChart Compatible hardware, multi-window views, one touch recording, simultaneous recording from multiple devices, specialized preconfigured settings, easy sharing options and an interface that can be customized to show only the features you want to use.
Features and Add-Ons
Additional acquisition and analysis options to support your Wired Physiological Monitoring analysis:
Data acquisition and analysis re-imagined.
Make unique discoveries with unlimited freedom and flexibility.
